Diva 0-10 V dimmer for fluorescent and LED fixtures control with gloss finish. 0 to 10 V is quickly becoming one of the more popular dimming technologies in commercial spaces. Lutron offers a variety of control options to give you both high-quality dimming capabilities and additional opportunities to save energy. These control options allow you to take advantage of multiple energy saving strategies.
Single pole/3-way with Preset
50 mA sink, 8 A load
Controls 120–277 V without a power pack
Large paddle switch with a captive linear-slide control for a standard designer-opening wallplate
Coordinating Claro® and Satin Colors® wallplates (available separately)
High-end and low-end trim user adjustable for optimal performance
Available in black
Warranty - Yes
Spec Sheet available - Yes
Depth:
7.62 mm
Height:
119.13 mm
Width:
74.68 mm
DC Voltage:
10 Volts
Power:
Operating Voltage: 24 V-100 mA
Output Ratings
Power Pack required for load switching. Power Pack is rated for 16 A
30 mA maximum output, sink ONLY.
0–10 V Control Link
0–10 V control is Class 2
Controls up to 15 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast / driver to limit the current draw to 2.0 mA maximum)
Warranty (Length/Type):
1 Year Limited
Certifications:
UL
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
Current Draw:
8 Amps
AC Voltage (Minimum):
120 Volts
AC Voltage (Maximum):
277 Volts
Performance:
For 120-277 V installations switching more than 8 A, use DVTV- with Lutron® Power Pack
(model PP-DV; see Lutron® P/N 369544).
For 347 V installations, use DVTV- with Lutron® Power Pack (model PP-347H; see Lutron®
P/N 369544).
Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.2.
Adjustable high-end and low-end trim for optimal dimming performance.
Power failure memory: should power be interrupted, the 0–10 V- signal will return to its previously set level prior to the interruption when power is restored.