Lighting Control Systems : Dimmers & Dimmer Systems : Lutron Electronics Company, Inc. - DVSTV

3-way Single Pole Dimmer for Fluorescent and LED Fixture

Model: DVSTV

Single pole/3-way with Preset
50 mA sink, 8 A load
Controls 120–277 V without a power pack
Large paddle switch with a captive linear-slide control for a standard designer-opening wallplate
0–10 V control link controls third party fixtures

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

Diva 0-10 V dimmer for fluorescent and LED fixtures control with gloss finish. 0 to 10 V is quickly becoming one of the more popular dimming technologies in commercial spaces. Lutron offers a variety of control options to give you both high-quality dimming capabilities and additional opportunities to save energy. These control options allow you to take advantage of multiple energy saving strategies.

Single pole/3-way with Preset
50 mA sink, 8 A load
Controls 120–277 V without a power pack
Large paddle switch with a captive linear-slide control for a standard designer-opening wallplate
0–10 V control link controls third party fixtures
DVTV- wires as a 24 V switch
Patented switching technology extends product lifetime
Coordinating Claro® and Satin Colors® wallplates (available separately)
High-end and low-end trim user adjustable for optimal performance

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Depth: 7.62 mm
Height: 119.13 mm
Width: 74.68 mm
Power:
- Operating Voltage: 24 V-100 mA
- Output Ratings
- Power Pack required for load switching. Power Pack is rated for 16 A
- 30 mA maximum output, sink ONLY.
- 0–10 V Control Link
- 0–10 V control is Class 2
- Controls up to 15 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast / driver to limit the current draw to 2.0 mA maximum)
Performance:
- For 120-277 V installations switching more than 8 A, use DVTV- with Lutron® Power Pack (model PP-DV; see Lutron® P/N 369544).
- For 347 V installations, use DVTV- with Lutron® Power Pack (model PP-347H; see Lutron® P/N 369544).
- Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.2.
- Adjustable high-end and low-end trim for optimal dimming performance.
- Power failure memory: should power be interrupted, the 0–10 V- signal will return to its previously set level prior to the interruption when power is restored.
- Captive linear slider.
- Precise color matching.
Environment:
- For Indoor Use Only.
- 0% to 90% humidity.
Application Requirements:
- No derating required if ganged.
- Night light not available.
- Always consult local wiring codes.
Warranty (Length/Type): 1 Year Limited
DC Voltage: 10 Volts
Current Draw: 8 Amps
AC Voltage (Minimum): 120 Volts
AC Voltage (Maximum): 277 Volts
Certifications: UL