Camera Controls : Camera Control Units : Sony Australia - HXCUFB80

4K/HD Camera Control Unit for HXC-FB80 Cameras

Model: HXCUFB80

3G-SDI Platform Capable of 1080/50p and 59.94p
Camera head and CCU can comfortably output 3G-SDI signals including 1080/50p and 59.94p
New processor can also support 1080/23.98 PsF on top of 25 PsF and 29.97 PsF
Future-Proof 4K Upscalable and HD HDR Support with CCU
Combined with the HXCU-FB80 CCU, the HXC-FB80 camera’s output is 4K upscalable and yet HD HDR-capable supporting HLG (Hybrid Log-Gamma)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

HD Studio Camera System with 4K upscale and HD HDR capability.

The HXC-FB80 is a cost-effective high-performance HD portable camera with three Sony 2/3-inch Exmor™ CMOS sensors and a 3G-SDI platform capable of 1080/50p and 59.94p signal processing while achieving low power consumption. In combination with the HXC-FB80 HD Camera, HXCU-FB80 CCU offers user-beneficial expandability including 4K upscale and HD HDR support (HLG, Hybrid Log-Gamma) for a future-proof solution. The optional PC-based HZC-RCP5 Remote Control Panel is available for a simpler application system.

3G-SDI Platform Capable of 1080/50p and 59.94p
Camera head and CCU can comfortably output 3G-SDI signals including 1080/50p and 59.94p
New processor can also support 1080/23.98 PsF on top of 25 PsF and 29.97 PsF
Future-Proof 4K Upscalable and HD HDR Support with CCU
Combined with the HXCU-FB80 CCU, the HXC-FB80 camera’s output is 4K upscalable and yet HD HDR-capable supporting HLG (Hybrid Log-Gamma)
4K signal output, the HXCU-FB80 is equipped with a 12G-SDI interface with quad 3G-SDI
Addition to hardware-based remote control units, PC software-based HZC-RCP5 Remote Control is also available
MCS (Multi Camera System) capabilities
Provides support for up to 24 units, forming a complete MCS system
Long cable extension and choice of fiber interface
Using a hybrid cable with a power supply, the distance between the camera head and CCU can be extended up to 600m
In case of the combination with HXC-P70, it can extend up to 1,000m
Addition to the Neutrik connector interface, a LEMO connector interface is also available for the camera head and CCU
Long-distance transmission up to 10km with single-mode fiber cable In the case of connection with a single-mode fiber cable (SMF)
Transmission can extend up to 10km using a local power supply
HD video trunk and HD prompter
Addition to the camera captured 1080 50i/59.94i video signal, another video signal can be passed through the same fiber connection line to the CCU side because of the 3G-SDI platform
Further to the traditional analog composite prompter support, the HD-SDI signal can be supplied from the CCU side

Types of Camera Control - Other
Video Signal Formats for CCU Control - PAL
Video Signal Formats for CCU Control - NTSC
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 5 C
Compatible Cameras: HXC-FB80
Image Sensor (Camera): 2/3-inch Exmor™ CMOS
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2.20 Amps
Depth: 366 mm
Height: 66 mm
Width: 482 mm
Product Weight: 6.20 kg
Signal Format: 4K 2160 : 59.94p, 50p (2SI, SQD, Level-A/B) HD 1080: 59.94p, 59.94i, 50p, 50i, 29.97PsF, 25PsF, 23.98PsF, HD 720 : 59.94p, 50p SD 480 : 59.94i, 576: 50i
Input/Output:
•Camera: Optical Fiber (x1), CCFN Cable or Single Mode Fiber Cable (LC type)
•Distance of Power Supply: 600m (maximum) by CCFN Sony Hybrid Type Fiber Cable (with Portable Lens and HXC-FB80), 1,000m (maximum) by CCFN Sony Hybrid Type Fiber Cable (with Portable Lens and HXC-P70)
•Distance of Fiber Cable by Local Power Supply: 10km (maximum) by Single Mode Fiber Cable (LC type) (with HXC-FB80)
•Intercom (on the front panel): XLR type: 5-pin, female (x1)
•Intercom/Tally/Program
•D-sub 25-pin, female (x1)
•INTERCOM (PROD, ENG), 4Wire/RTS/Clear-Com, 0dBu
•PGM 1 system, -20/0/+4dBu
•TALLY (R, G)
•PREVIEW
•Remote: 8-pin (x1)
•Trunk: D-sub 9-pin, female (x1) RS-232C/RS-422A, 1 system
•LAN: 8-pin (x1)
•Reference: BNC (x2), In: HD: SMPTE 274M, Tri-Level Sync, 0.6Vp-p, 75 OHM SD: Black Burst (NTSC: 0.286Vp-p, 75 OHM / PAL: 0.3Vp-p, 75 OHM), Out: Loop-Through
•Prompter: BNC (x2), In: VBS, 1.0Vp-p, 75 OHM, 1 system, Out: Loop-Through
Input:
•AC In: (x1), AC 100 V to 240 V
•Return In VBS1, VBS2: BNC (x2), 1.0Vp-p, 75 OHM, 2 systems
•Return In SDI1, SDI2: BNC (x2) HD SDI, SMPTE ST292-1, 1080: 59.94i, 50i, 29.97PsF, 25PsF, 23.98PsF, 720: 59.94p, 50p SD SDI, 480: 59.94i, 576: 50i
•HD Prompter In: BNC (x1) HD SDI: SMTPE ST292-1, 0.8Vp-p, 75 OHM
Output:
•SDI Out (SLOT-1) HD/SD: BNC (x4) HD SDI: SMTPE ST292-1, 0.8Vp-p, 75 OHM, SD SDI: SMPTE 259M, 0.8Vp-p, 75 OHM, HD SDI/SD SDI selectable
•SDI Out (SLOT-2) 3G/4K/HD Trunk: BNC (x4) : 4K/3G SDI 1~4: SMPTE ST425-5, Level-A/B, 0.8Vp-p, 75 OHM: 2160/59.94p, 2160/50p, 1080/59.94p, 1080/50p, 4K/12G SDI 1, 2: SMPTE ST2082-1, 0.8Vp-p, 75 OHM: 2160/59.94p, 2160/50p, HD 3G SDI: SMPTE ST425-1, 0.8Vp-p, 75 OHM: 1080/59.94p, 1080/50p, HD SDI 3, 4: SMPTE ST292-1, HD Trunk 1080/59.94i, 1080/50i, 0.8Vp-p, 75 OHM, 4K/3G/HD Trunk: Selectable
•VBS1, 2: BNC (x2), VBS 1.0Vp-p, 75 OHM
•Pix: BNC (x1), VBS/R/G/B (VBS 1.0Vp-p, 75 OHM)
•Sync: BNC (x1), SMPTE 274-1, HD: tri-level sync, 0.6Vp-p, 75 OHM SD: composite sync, 0.3Vp-p, 75 OHM HD SYNC/SD SYNC selectable
•Audio Out CH-1, CH-2: XLR 3-pin, male (x2), 0/-20dBu

CCU 341386 kb - Data Sheet

Project List

Suggested Products

Serial Joystick Controller

by HuddleCamHD

DCN Multimedia Camera Control

by Bosch Conferencing and Public Address Systems

Alfatron analog PTZ Camera controller

by Alfatron Electronics, Inc.