Wireless Signal Processing : Beltpack Receivers & Transmitters (Wireless) : Shure Incorporated - P3TRA215CL-J13

Stereo Personal Monitor System with P3RA Professional Wireless Bodypack Receiver, 566 to 590MHz Frequency Range

Series: Shure

Model: P3TRA215CL-J13

566 to 590 MHz Frequency range
30mW output power
Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide
PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage
Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Other Options

The P3TRA215CL is part of the PSM 300 wireless systems family.

Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide

PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.

566 to 590 MHz Frequency range
30mW output power
Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide
PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage
Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts
Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel
Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio

Wireless Receiver Transmission - FM
Wireless Receiver Transmission - IR
Wireless - Yes

P3R WIRELESS BODYPACK RECEIVER:
- Active RF Sensitivity (at 20 dB SINAD): 2.2 ?V
- Image Rejection: >90 dB
- Adjacent Channel Rejection: >60 dB
- Intermodulation Attenuation: >50 dB
- Blocking: >60 dB
- Audio Output Power (1 kHz at <1% distortion, peak power, at 32 ohm): 80 mW (per output)
- Minimum Load Impedance: 16 ohm
- Headphone output: 3.5 mm (1.8") stereo
- Net Weight: 98 g (3.5 oz.) (without batteries)
- Dimensions (H × W × D): 110 × 64 × 21 mm (4.3 x 2.5 x 0.8 in.)
- Battery Life: 5-7 hours (continuous use) AA batteries
P3T TRANSMITTER:
- RF Output Power 10, 20, 30 mW
- Note: varies by region
- RF Output Impedance 50 ohm (typical)
- Net Weight 783 g (27.6oz.)
- Dimensions (H × W × D) 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.)
- Power Requirements 12–15 V DC, 260 mA maximum
Frequency band: 566 to 590 MHz
Output Power: 30 mW

P3RA=-J13 - Professional Wireless Bodypack Receiver, 566 to 590MHz Frequency Range

P3T=-J13 - Half Rack Single Channel Wireless Transmitter, 566 to 590MHz Frequency Range

SE215-CL - Sound Isolating Dynamic MicroDriver Earphone with Detachable Cable, Clear

Monitor System 349 kb - Brochure

Project List

Stereo Personal Monitor System with P3RA Professional Wireless Bodypack Receiver

by Shure Incorporated

Model: P3TRA215CL

Find a Dealer

Suggested Products

Portable Single Channel IFB Beltpack with 1/4-inch Jack

by RTS

UHF/VHF beltpack for BTR-30N Series

by RTS

488-524 MHz Bodypack Transmitter

by Electro-Voice