The three position selector switch allows the operation of Servoreeler "A" or "B" individually, or in the center position, will operate both together.
The normal "Auto"-"Incremental" switch is also provided. This selects between full Auto "lock-in" operation and "Incremental" manual vertical adjustment of microphone height.
The WP1-2 Controller is intended for installation into an existing wall. It is attached to a low voltage rated-open back fixture that facilitates installation from the front of a finished wall.
The WP1-2 is intended for installation into an existing wall. It provides the user with individual and master control of two suspended microphones. The simultaneous operation can be useful when supporting a stereo bar with two Servoreelers, or when deploying a stereo pair.
The three position selector switch allows the operation of Servoreeler "A" or "B" individually, or in the center position, will operate both together.
The normal "Auto"-"Incremental" switch is also provided. This selects between full Auto "lock-in" operation and "Incremental" manual vertical adjustment of microphone height.
The WP1-2 Controller is intended for installation into an existing wall. It is attached to a low voltage rated-open back fixture that facilitates installation from the front of a finished wall.
Systems Controlled - Audio
Spec Sheet available - Yes
Selectable:
One, two or both operations
Station:
Consists of a single "B" control station
DC Voltage:
24 Volts
Power::
Powered by an externally located plug-in regulated 24Vdc power source. The power connector employs a standard 5.5mm x 2.5mm positive center configuration. For SRL-8 to SRL-40 operation, allow 600ma. to 800ma. for each Servoreeler. For larger SRL-90, allow 1.5 for each unit.
Controller::
The WP1-2 controller can be retrofitted to an existing wall.