The S-4000H is a component of the S-4000 Digital Snake System. It has 8 +4 line level inputs, 32 +4 line level outputs and redundant Ethernet connectors. It is typically used at the Front of House console position providing 32 outputs to the console from the stage sources and 8 inputs or returns from the console’s buses. The S-4000H is also often used at Split positions providing 32 outputs of the Stage sources for monitor consoles, recording rooms or broadcast feeds. The Inputs and Outputs are provided on 8-channel 25 pin D-Sub connectors using the Tascam™ wiring standard. The audio is +4 line level and there are four 8-channel Output connectors and one 8-channel Input connector.
32 +4 Line Level Outputs and 8 +4 Line Level Inputs provide professional quality source and return audio
Convenient 8-channel D Sub connectors with security bar
MASS connector options for touring and PA/Rental applications
Redundant Ethernet ports with rugged Neutrik Ethercon connectors
Offer seamless switching to backup cable with no loss of audio
Optional S-240P power supply switches automatically
With no loss of audio in case of power supply interruption
Warranty - Yes
Depth:
386.70 mm
Dynamic Range:
110 dB
Frequency Response:
-2 dB / +0 dB (at +4 dBu, 20 Hz to 20 kHz)
Height:
133 mm
Input Impedance:
30 Kilo Ohms
Number of Channels:
8 in 32 out
Output Impedance:
600 ohms
Power Consumption:
70 W
Recommended Load Impedance:
10 Kilo Ohms
Sample Rate:
96.0 kHz
Signal Processing:
24 bit
Width:
482 mm
Phantom Power:
+48 V / 14 mA (each input on SI-AD4, remote controlled)
Nominal Input Level:
+4 to +22 dBu
DC Power Supply:
+24 V (from optional external power supply unit : S-240P)
Nominal Output Level:
+4 to +22 dBu
Total Harmonic Distortion + Noise:
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz)
AC Power supply:
115, 117, 220, 230, 240 V AC (50/60 Hz)
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
Product Weight:
9.40 kg
Warranty (Length/Type):
1 year limited
Current Draw:
6 Amps
Cross Talk:
-80 dB
Residual Noise Level (IHF-A, typ):
-90 dBu
Network Latency:
375 microseconds when using REAC cable only (AD - REAC - DA Latency: about 1.2 ms)