Audio Production Equipment : Audio Mixers / Consoles : RDL, Radio Design Labs - ST-MX2

2 Mic or Line Input Mixer - Mic and Line Out

Series:

Model: ST-MX2

Two Input Audio Mixer
Selectable Mic or Line Level Inputs
Simultaneous Mic and Line Outputs
Add Additional Inputs to an Existing Mixer
Audio Output Dual-LED VU Metering

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The ST-MX2 is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier. A mic or professional +4 dBu line-level mono sum is possible. It may be used to convert mono line-level signals from consumer to professional, or from professional to consumer format. It may also be used as a microphone preamplifier, or conversely to adapt unbalanced or balanced line-level signals into the microphone input of other equipment.

Two Input Audio Mixer
Selectable Mic or Line Level Inputs
Simultaneous Mic and Line Outputs
Add Additional Inputs to an Existing Mixer
Audio Output Dual-LED VU Metering
Balanced or Unbalanced Inputs and Outputs
Low-Noise and Low-Distortion Performance

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Maximum Frequency Response (Bandwidth): 50 kHz
Maximum Frequency Response (Bandwidth): 50000 Hz
Minimum Frequency Response (Bandwidth): 25 Hz
Minimum Frequency Response (Bandwidth): 0.03 kHz
Total Harmonic Distortion + Noise (THD+N): 0.01 %
Number of Audio Inputs (Analog): 2
Number of Audio Outputs (Analog): 2
Inputs: Selectable mic or line
Input Level for +4 dBu output Mic: -45 dBu to -65 dBu Max input -28
Input Level for +4 dBu output Line: -18 to +10 dBu Max input +22 dBu
Input Impedance Line: 20 K ohm bridging
Inpu Outputs (2): MIC and LINE
Output Impedance: 150 ohm (mic or line)
Frequency Response Line: 10 to 30000 Hz
THD+N Line: < 0.005 %
THD+N IMD: < 0.004 %
Output Level: Mic -45 dBu
Output Level: Line +4 dBu
Power Requirement: 24 to 33 VDC @ 60 mA

RU-MX5ML - 5 Channel Mic/Line Audio Mixer with Phantom Power

ST-MPA24 - 24V Adjustable Dual Microphone Phantom Adapter

ST-MPA48 - 48V Fixed Dual Microphone Phantom Adapter

ST-MX3 - 3 Line Input Mixer - Line Out

STS-RF1 - Shielded Chassis for STICK-ON Module

TX-LC2 - Unbalanced to Balanced Line Combiner

TX-MX2R - Audio Mixer / Distribution Amplifier

Datasheet for 2 Mic or Line Input Mixer - Mic and Line Out 653827 kb - Other

Project List

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel

Find a Dealer

Find a Distributor

Suggested Products

Avia 12x8 Digital Signal Processor

by Crestron Electronics, Inc.

DSP Engine upto 120 Inputs

by Yamaha Commercial Audio Systems, Inc.

Digital Mixing Console

by Yamaha Commercial Audio Systems, Inc.