Signal Processing Systems : Related Signal Processing Products : RDL, Radio Design Labs - DS-TPS7A

Passive Single-Pair Sender

Series:

Model: DS-TPS7A

Stereo Audio Input Combined to Mono Output
Input on Mini-jack
Switch Selects which RJ45 Pair (A, B or C) is Fed
Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
Passive Circuitry Does Not Require Power

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The DS-TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer provides isolation between the audio source and the RJ45 TP CABLE. The DS-TPS7A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The DS-TPS7A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The DS-TPS7A is a passive module that does not require power to operate. If power is present on a cable connected to a TP CABLE jack, that power is passed through to the modules connected to the other TP CABLE jack.

Stereo Audio Input Combined to Mono Output
Input on Mini-jack
Switch Selects which RJ45 Pair (A, B or C) is Fed
Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
Passive Circuitry Does Not Require Power
Galvanic Isolation through a Studio-Quality Transformer
Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

Spec Sheet available - Yes

Depth: 48.01 mm
Height: 104.39 mm
Width: 40.64 mm
Shipping Weight: 0.18 kg
INPUT: 3.5mm mini-jack, unbalanced stereo combined to mono
Input Level: -10 dBV +22 dBu max
Format-A Signal Pair Used: Switch-selectable A, B, or C (rear-panel switch)
Format-A Input: RJ45 TP CABLE
Ouput: RJ45 TP CABLE, RDL TP Format-A
Frequency Response: 20 Hz to 20 kHz (±0.5 dB)
THD: < 0.1% (50 Hz to 20 kHz); <0.001% (1 kHz typ)
Power Requirement: Passive

D-RC2 - Remote Audio Mixing Control

D-RC2M - Remote Audio Mixing Control with Muting

D-RC3 - Remote Audio Mixing Control

D-RC3M - Remote Audio Mixing Control with Muting

D-TPS6A - Passive Single-Pair Sending Module

D-TPS7A - Passive Single-Pair Sender

DB-TPS3A - DB-TPS3A Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs

DS-RC2 - Remote Audio Mixing Control

DS-RC2M - Remote Audio Mixing Control with Muting

DS-RC3 - Remote Audio Mixing Control

DS-RC3M - Remote Audio Mixing Control with Muting

DS-TPS6A - Passive Single-Pair Sender

FP-MX3R - Remote Controlled Line-Level Mixer

FP-TPX3A - Format-A Twisted Pair Remote Controlled Mixer

RU-BNF - Format-A Bi-directional Network Interface

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

tpp7a_tps7a[3]1.pdf 1397 kb - Data Sheet

Project List

CP-1
Single Cover Plate - white

CP-1G
Single Cover Plate - gray

CP-2
Double Cover Plate - white

CP-2G
Double Cover Plate, Gray

DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

SMB-1G
Surface Mount Boxes for Remote Controls and Panels

SMB-1W
Surface Mount Boxes for Remote Controls and Panels

SMB-2G
Surface Mount Boxes for Remote Controls and Panels

SMB-2W
Surface Mount Boxes for Remote Controls and Panels

SMB-3G
Surface Mount Boxes for Remote Controls and Panels

SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels

SMB-4G
Surface Mount Boxes for Remote Controls and Panels

SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels

Find a Dealer

Find a Distributor

Suggested Products

RemoteTableKit-Pro™ Table Extension Kit

by Sound Control Technologies

24 Port 10G PoE+/PoH+ Injector 750 Watts

by Aurora Multimedia Corporation

10W Ethernet Node

by Luminex Network Intelligence