Signal Processing Systems : Extenders : PureLink - HWCE Tx/Rx

4K HDMI and USB 2.0 over HDBaseT Wall Plate Extender

Model: HWCE Tx/Rx

HDMI, 3.5mm audio, and USB 2.0 extension over HDBaseT™
Supports resolutions up to 4K at 60Hz (4:2:0)/4K at 30Hz (4:4:4)
Supports HDR (High Dynamic Range) content
HDCP 2.2 and HDMI 1.4 compliant
Supports distances up to 130ft (40m) at Ultra HD/4K and 230 ft (70m) at 1080p

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

The HDTools™ HWCE Tx/Rx is a single-gang HDMI and USB 2.0 Wall Plate Extension System providing Ultra HD/4K signal transmission over a single CATx cable to distances up to 130 ft. The HWCE can also transmit 3.5mm analog audio independent from the HDMI or USB input source. The HWCE is HDMI 1.4 and HDCP 2.2 compliant and supports CEC, as well as one-way RS-232 pass-through.

HDMI, 3.5mm audio, and USB 2.0 extension over HDBaseT™
Supports resolutions up to 4K at 60Hz (4:2:0)/4K at 30Hz (4:4:4)
Supports HDR (High Dynamic Range) content
HDCP 2.2 and HDMI 1.4 compliant
Supports distances up to 130ft (40m) at Ultra HD/4K and 230 ft (70m) at 1080p
Independent analog audio signal transmission
RS-232 and CEC pass-through
Remote power from receiver to transmitter
Standard US 1-Gang Decora format (Tx)

Extender Type - HDMI
Extender Type - USB
Rackmountable - Yes
Warranty - Yes
HDBaseT - Yes

Operating Temperature (Maximum): 47 C
Operating Temperature (Minimum): 0 C
Transmission Range: 7010.40 cm
Wireless: No
Current Draw: 1 Amps
DC Voltage: 24 Volts
Depth: 29.97 mm
Height: 103.38 mm
Width: 29.97 mm
Product Weight: 0.16 kg
Warranty (Length/Type): 5 Years
Active Power: 9 Watt
Audio: Digital Audio: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD; Analog Audio: LPCM 2CH, LPCM 5.1, Dolby Digital 2/5.1CH, DTS 2/5.1CH
Input Signal Type(s): (1) HDMI Type A [19-pin female], (1) 3.5mm stereo audio, (1) USB Type B
Output Signal Type(s): (1) HDBaseT™ OUT [RJ45]
Supported distance: up to 130ft (40m) at Ultra HD/4K and 230ft (70m) at 1080p
Supported Resolutions: 4K at 50/60Hz (4:2:0), 4K at 30Hz (4:4:4), 1080p at 120Hz, 1080p 3D at 60Hz
Data Transfer Rate: 18 Gbps
Video Bandwidth: 10.2 Gbps
Compliance: HDMI 1.4, HDCP 2.2, USB 2.0
RS-232: (1) RS-232 [3-pin phoenix]
Storage Temperature: - 40° ~ 158° F (-40° to 70° C)
Relative Humidity: 0 ~ 90% non-condensing
MTBF: 50000 hours
Rack Mounting Option: Standard 19 inch rack-mountable design
Certifications: US/EU, CE/FCC/UL

DCE II Rx - DVI Over CAT Extender - Receiver

DCE II Tx - DVI Over CAT Extender - Transmitter

HCE II Tx - HDMI over HDBaseT Extender - Transmitter

HCE III-L RX - 4K HDMI over HDBaseT Extender with Loop Out

HCE III-L TX - 4K HDMI over HDBaseT Extender with Loop Out

PM-CR104-U - 4K HDMI over CATx HDBaseT Receiver

PM-CT104-U - 4K HDMI to CATx (HDBaseT) Transmitter

Suggested Products

4K 18Gbps HDMI USB KVM Extender via CATx Cable to 230 Feet

by Network Technologies Inc. (NTI)

High Performance IP to Port Expander

by Aurora Multimedia Corporation

Low-Cost 4K HDMI USB KVM Extender Over IP, US NEMA 1-15P

by Network Technologies Inc. (NTI)