Resolution:
•4K+ (5120 x 3200) (Quad Pixel Drive: ON)
Refresh rate:
•240Hz x 1
Light source:
•Laser diodes (Laser class: Class 1) (Class 3R for US models), Light source life: 20,000 hours (NORMAL mode, brightness decreases to approx. 50 %)
Brightness:
•21,000 lm (Center) x 2/20,000 lm x 3
Keystone correction range:
•Vertical: ±40° (±22° with ET-D75LE50/ET-D3LEW50, ±28° with ET-D75LE6/ET-D3LEW60, +5° with ET-D75LE95), Horizontal: ±15° (0° with ET-D75LE95)
Keystone correction range with optional Upgrade Kit ET-UK20:
•Vertical: ±45° (±40° with ET-D75LE10/ET-D3LEW10, ET-D75LE20/ET-D3LES20, ±22° with ET-D75LE50/ET-D3LEW50, ±28° with ET-D75LE6/ET-D3LEW60, +5° with ET-D75LE95), Horizontal: ±40° (±15° with ET-D75LE50/ET-D3LEW50, ET-D75LE6/ET-D3LEW60, ET-D75LE10/ET-D3LEW10, 0° with ET-D75LE95), Up to a total of ±30° during simultaneous horizontal and vertical correction
DLP™ chip Display method:
•DLP™ chip x 3, DLP™ projection system
DLP™ chip Pixels:
•49,152,000 (12,288,000 x 4) pixels when Quad pixel drive set to ON, 4,096,000 (2560 x 1600) x 3, total of 12,288,000 pixels when Quad pixel drive set to OFF
Screen size (diagonal) (mm):
•1.78-25.4m with 16:10 aspect ratio, 1.78-15.24m with the ET-D75LE8 / ET-D3LET80, 16:10 aspect ratio, 3.05-15.24m with the ET-D75LE95, 16:10 aspect ratio
Screen size (diagonal) (inch):
•70-1,000 inch with 16:10 aspect ratio, 70-600 inch with the ET-D75LE8/ET-D3LET80, 16:10 aspect ratio, 120-600 inch with the ET-D75LE95, 16:10 aspect ratio
Terminals SERIAL IN:
•D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals SERIAL OUT:
•D-sub 9-pin (male) x 1 for link control
Terminals REMOTE 1 IN:
•M3 x 1 for wired remote control, link control
Terminals REMOTE 1 OUT:
•M3 x 1 for wired remote control, link control
Terminals REMOTE 2 IN:
•D-sub 9-pin (female) x 1 for external control (parallel)
Terminals LAN/DIGITAL LINK:
•RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP2.2
Terminals DC OUT:
•USB Type A x 2 (for power supply DC 5V total of 2 A)
Terminals Expansion Slot:
•SLOT 1 / SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible
Operating noise x 3:
•TBD
Applicable software/application:
•Logo Transfer Software, Multi Monitoring and Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™