Newly developed Rich Color Harmonizer achieves deeper, more vibrant color expression.
Combined with Smooth Pixel Drive, a technology that creates crisp yet smooth images using 1-axis wobbling, you can enjoy colorful and highly detailed images beyond the panel resolution.
Seamless Integration with SLOT NX and Full Lens Lineup:
With technologies to support 4K playback, including 4K signal input via HDMI®, DIGITAL LINK, and optional SLOT NX interface boards, the seamless integration of 4K content is greatly simplified.
The PT-RCQ10U is a 10,000 lumen, 4K Ready, 1-Chip DLP Solid Shine laser projector designed for house of worship, education and corporate.
Detailed Images Rich in Natural Colors:
Newly developed Rich Color Harmonizer achieves deeper, more vibrant color expression.
Combined with Smooth Pixel Drive, a technology that creates crisp yet smooth images using 1-axis wobbling, you can enjoy colorful and highly detailed images beyond the panel resolution.
Seamless Integration with SLOT NX and Full Lens Lineup:
With technologies to support 4K playback, including 4K signal input via HDMI®, DIGITAL LINK, and optional SLOT NX interface boards, the seamless integration of 4K content is greatly simplified.
Compatibility with our 1-Chip DLP™ lenses, including the ET-DLE020 Ultra-Short-Throw Zoom Lens, further enhances application flexibility.
Excellent Reliability in Tough Conditions:
Further improvements to Panasonic’s unique SOLID SHINE Laser cooling system achieve
20,000 hours*2 of maintenance-free operation, all from the same compact body-size as our 1-Chip DLP™ WUXGA laser models.
Projector Technology Type - DLP
Supported Resolution - 4K (4096x2400)
Projector Applications - Corporate
Projector Applications - Education
Projector Applications - Houses of Worship
Number of Imagers - 1-chip
Spec Sheet available - Yes
Additional Specs:
Terminals - REMOTE 1 IN: M3 x 1 for wired remote control Contrast Ratio*1: 10,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON) Terminals - USB: USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA) Center-to-corner zone ratio*1: 90%
Note:
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 Lens shift is not supported on theET-DLE055, and the optical axis is fixed with the ET-DLE035. *4 With legs at shortest position. *5 Average value. May differ depending on the actual unit. *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperaturebecomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may bereduced to protect the projector.
Environmental:
Power supply: AC 100-240 V, 50/60 Hz Power consumption: 1,200 W Cabinet materials: Molded plastic Operation noise*1: TBD Weight*5: 23.8 kg (52.5 lbs) Operating environment: Operating temperature: 0-45 °C (32-113 °F)*6, operating humidity: 10-80 % (no condensation)
Projector:
Projector type: 1-Chip DLP™ projector DLP™ chip - Panel size (mm): 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio DLP™ chip - Panel size (inch): 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio DLP™ chip - Display method: DLP™ chip x 1, DLP™ projection system DLP™ chip - Number of Pixels: 2,304,000 (1920 × 1200) pixels, 4,608,000 (2,304,000 x 2) pixels when 4K Smooth Pixel Drive set to ON Light source: Laser diodes Light output*1: 10,000 lm Time until light output declines to 50 %*2: 20,000 hours (NORMAL) / 24,000 hours (ECO) Resolution: 4K-equivalent (4K Smooth Pixel Drive: ON) Screen size [diagonal] (mm): 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio Screen size [diagonal] (inch): 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio
Terminals:
Installation: Ceiling/floor, front/rear, free 360-degree installation Terminals - REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel) Terminals - LAN: RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net Terminals - DIGITAL LINK/LAN: RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2 Terminals - Expansion Slot: SLOT for interface boards, SLOT NX compatible
Software:
Applicable software: Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Lens:
LENS: Optional lenses Lens shift - Vertical (from center of screen): +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) Lens shift - Horizontal (from center of screen): +30 %, -10 % (+19 %, -10 % with ET-DLE060 / +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) Keystone correction range: Vertical: +/-40° (+/-16° with ET-DLE060, +/-22° with ET-DLE105/ET-DLE085/DLE055, +5° with ET-DLE035),Horizontal: +/-15° (+/-10° with ET-DLE060) (cannot be operated with ET-DLE035) Keystone correction range with optional ET-UK20 Upgrade Kit: Vertical: +/-45° (+/-16° with ET-DLE060, +/-40° with ET-DLE150/DLE250/ET-DLE170, +/-22° with ET-DLE105/ET-DLE085/DLE055),Horizontal: +/-40° (+/-10° with ET-DLE060, +/-15° with ET-DLE105/ET-DLE085/DLE055),When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55°.