The NMC1002 provides one channel media conversion between 1000Base-T and 1000Base-SX/LX through mini-GBIC module. NMC1002 is a Plug-and Play device, it provides optional management module (MOD-SNMP) that can control this media converter through the chassis system (RP-MCR116), the device can be controlled through Web Browser, SNMP and terminal emulation program. The management module will detect the default reset on the DIP switches and display out the status, also the management module can control the function through the chassis system.
Compliant with IEEE 802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX Gigabit Ethernet Standards
Provides one 1000Base-T port, one mini-GBIC port supporting either multimode or single-mode fiber
Supports full duplex and auto-negotiation mode for fiber port
Front panel diagnostic LED indications
Provides dip switch to setting fiber (auto/manual), LLR (enable/disable)
Provides 19" system chassis for up to 16-converter with redundant power supply for optional expansion use
Supports LLCF (Link Loss Carry Forward, Link Pass Through)
Supports LLR (Link Loss Return) for Fiber port
Monitor the status of duplex/link for both media via management module MOD-MCSNMP through media converter chassis system (MCR116)
Set duplex force, LLR on/off for fiber, ports on/off via the MOD-MCSNMP through MCR116
Provides link down source port information
Spec Sheet available - Yes
Operating Temperature (Maximum):
45 C
Operating Temperature (Minimum):
0 C
Current Draw:
1.50 Amps
DC Voltage:
7.50 Volts
Depth:
88 mm
Height:
25 mm
Width:
120 mm
Regulatory Compliance:
FCC, CE, GOST-R
Data Transfer Rate:
2000 Mbps
Protocol:
CSMA/CD
Power Supply:
External Power Adapter DC 7.5V/1.5A
NMC1000
- 1000Base-T to 1000Base-SX/LX Smart Gigabit Media Converter