Cables & Connectors : Connectors : Neutrik - NO2-4FDW-1-A

opticalCON DUO Chassis Connector, Black Chromium Plating, 4 Solder Contacts, 1 Shell Ground Contact

Model: NO2-4FDW-1-A

Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Suitable for indoor (studio) camera links considering specific conditions according to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
Accommodates standard LC connectors on the rear for simple installation

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The chassis connector acts as feed-through allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode. It has black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65 and front panel mount. Not compatible to SMPTE 344M standard. Suitable for indoor (studio) camera links considering specific conditions according to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Suitable for indoor (studio) camera links considering specific conditions according to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
Accommodates standard LC connectors on the rear for simple installation
Connection on the front side either by rugged opticalCON or standard LC connector
The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
Water resistant according to IP65 ingress protection in mated condition
In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52
Color coded rubber sealing to identify fiber mode – black multimode, blue single mode PC and green single mode APC

Adapter/Connector Type 1 - Other
Connector Product Type - Audio
Connector Product Type - Data
Connector Product Type - Video
ROHS Compliant - Yes
UL Rated - Yes

Connector Finish: Black chromium
Construction: Bronze, Polyamide, Zinc diecast, Ceramics
ROHS Compliant: Yes
UL Rated: Yes
AC Voltage: 50 Volts
Current Draw: 6 Amps
Gender: female
Contact Resistance: < 7 milliOhms (inner)
dielectric strength: 1.5 kVdc
Insulation Resistance: > 2 gigaohms (initial)
Ground contact: Faston 2.8 x 0.5 (soldering possible)
Insertion Force: < 45 N
Withdrawal Force: < 45 N
Lifetime: > 5000 mating cycles
Locking force: 1000 N
Locking Device: Push-Pull
Mounting Direction: front
Chassis Shape: D
Optical Connector: LC-Duplex Feedthrough
Insertion Loss: < 0.4dB/connection

NO2-4FDW-A - Chassis Connector, Black Chromium Plating, 4 Solder Contacts

Data Connectors 5412 kb - Other

Project List

Find a Dealer

Suggested Products

CAT6 Punchdown Keystone Jack 90 degree White

by Comprehensive Video Group (VCOM)

Cleerline SSF™ Tactical female duplex socket - Multimode

by Cleerline Technology Group

SC Optical Connector and IEC C14 AC Inlet for Singlemode Fiber

by Lightware