Signal Processing Systems : Video Processors : Network Technologies Inc. (NTI) - SPLITMUX-USBHD-4RT

HDMI Quad Screen Multiviewer with Built-In KVM Switch: Desktop

Series: SPLITMUX®

Model: SPLITMUX-USBHD-4RT

Quad, Picture in Picture, Full Screen, and Custom display modes.
Custom Display Mode: the size, position and selection of any or all windows are customizable.
2- and 3-source viewing is possible with this method.
Maintain input aspect ratio if desired-no stretching necessary.
Layer display windows and adjust transparency of each video source display.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The SPLITMUX® HDMI Quad Screen Multiviewer with Built-in USB KVM Switch allows you to simultaneously display video from four different computers on a single monitor. Additionally, it can switch one of the four attached computers to a shared keyboard and mouse for operation and to two additional USB devices. It is capable of displaying the video sources in quad, PiP, full, or custom mode. In custom display mode, each of the quadrants can be adjusted to any size and positioned to any location on the display.

For more information, visit: http://www.networktechinc.com/hdmi-kvm-multiviewer.html

Quad, Picture in Picture, Full Screen, and Custom display modes.
Custom Display Mode: the size, position and selection of any or all windows are customizable.
2- and 3-source viewing is possible with this method.
Maintain input aspect ratio if desired-no stretching necessary.
Layer display windows and adjust transparency of each video source display.
Switch one of the four attached computers to a shared USB keyboard and mouse for operation.
Supports 2K resolution 2048x1080, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA). Independent video in to video out resolution.
Independent video in to video out resolution.
HDMI features supported:
Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
Outputs: 24- and 30-bit sRGB.
Four-channel non-mixing or one channel mixing stereo with 16-, 20-, or 24-bit uncompressed PCM audio.
Bandwidth up to 165 MHz; Inputs: 2.25 Gbps; Output: 2.0625 Gbps.
HDCP compliant.
Fluid, real-time video performance with up to 60 frames per second (fps) in all four quadrants.
Zoom, pan, and crop the image from any source to focus on key areas.
Switch audio independently of video from connected HDMI sources.
Multiple audio sources can be simultaneously active in any display mode or preset layout.
Adjustable audio gain with VU level indicators for each input channel.
A customized text label can be added for each video window to provide easy input identification (UMD).
Control the multiviewer through Ethernet, RS232 serial port, keyboard/mouse commands, on screen display (OSD), front panel buttons, or optional IR remote.
Built-in 2-port USB hub - switch devices between connected computers.
In Full Screen mode, USB touch screen monitors can be used to control the connected active computer.
Compliant with USB 2.0 (high-speed and low/full speed) standards.
Cascade multiviewers to display video from any number of video sources on one screen.
Each video source in the cascade can be controlled directly from the Web Server graphical user interface under Custom Mode Settings.
Backup and restore multiviewer configurations.
Supported output resolutions can be selected or set to auto detect optimal resolution from the monitor's EDID.
Available options: desktop unit, 1RU rackmount unit, dual side-by-side rackmount units in 1RU
Rackmount units can be mounted so that the front panel buttons are facing the front or back of the rack.
Rackmount units include cable management shelf.
A DVI source/display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the multiviewer. Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer.

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Certifications: CE, RoHS, TAA compliant
Number of Inputs: 12
Number of Outputs: 1
Number of Video Channels: 4
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 20 Watt
Depth: 126.49 mm
Height: 44.45 mm
Width: 186.69 mm
Regulatory Compliance: CE, RoHS, TAA compliant
Warranty (Length/Type): Two years.
Hosts: Four female HDMI connectors. Four female USB Type B connectors. Supports USB computers. Boots PCs, SUNs, and MACs simultaneously. Supported video input resolutions: 2K Cinema (2048x1080 @ 60Hz) HDTV resolutions to 1080p Up to 1920x1200 (WUXGA) Supports HDMI devices, such as DVD/Blu-ray players, satellite receivers and HDTV tuners. Multiplatform support: Windows 7/8/10, Windows Server 2008/2012/2016/2019, Solaris, Linux, FreeBSD, and MAC OS 10/11. Supports HDCP 1.2.
Monitor: One female HDMI connector. Supported video output resolutions: 2K Cinema (2048x1080 @ 60Hz) HDTV resolutions to 1080p Up to 1920x1200 (WUXGA) HDMI-embedded audio switching (four-channel stereo, non-mixing or one channel stereo, mixing). Switch audio independently of video from connected HDMI sources. Multiple audio sources can be simultaneously active in any display mode or preset layout. Latency: 50mS at 60Hz. 60mS at 50Hz. 100mS at 30Hz. 120mS at 25Hz. 125mS at 24Hz. Supports HDCP 1.2.
DEVICES: Two female USB Type A connectors for keyboard and mouse. Keyboard and mouse are hot-pluggable. Two female USB Type A connectors for USB peripheral devices (printers, scanners, security cameras, flash drives, etc.) Connect any type of USB device - fully transparent USB connectors. Switch USB 2.0 devices between connected computers. In Full Screen mode, USB touch screen monitors can be used to control the connected active computer. Provides support for high-speed (480 Mbps), full-speed (12 Mbps), or low-speed (1.5 Mbps) USB devices.
Protocols: HTTP, HTTPS. TCP/IP, DHCP, UDP, ARP. IPV4. Supports HTTP REST API to configure SPLITMUX-USBHD-4RT with response in JSON format. How to Configure SPLITMUX-HD-4RT Using HTTP-Based Text Commands (HTTP REST API).
Package Includes: Multiviewer. One power adapter. One DB9 female to RJ45 female adapter. One 5ft CAT5e super flat cable. One IR remote control. Manual.
Compatible NTI Products: Combine NTI's video converters and splitters for multiple video sources and display signals. DVI-D to HDMI Single Link Interface Cable (DVI-HD-xx-MM). The cable does not pass audio to the multiviewer. DVI + Stereo Audio to HDMI Converter (DVIA-HD-CNVTR-LC). DVI + Digital Audio to HDMI Converter (DVI-HD-CNVTR). Composite Video + Audio to HDMI Converter (CVA-HD-LC). VGA + Audio to HDMI Converter Cable (VGAA-HD-ULC). VGA/Component Video/HDMI Scaler/Converter (PCHD-HDMI-SCALER).
MTBF: 101,457 hrs
Display Mode: Quad Mode: In quad mode, the screen is split into four fields of equal size each displaying the entire contents of the corresponding input. Fluid, real-time video performance with up to 60 frames per second (fps) in all four quadrants. Borders can be set for each image input.
Display Mode: Picture in Picture (PIP) Mode: In PIP mode, the full screen display of one of the four video sources is accompanied by one, two, or three small images (thumbnails) of the three other video sources on the right hand margin of the screen, allowing simultaneous monitoring. Size, position and selection of the thumbnails are customizable. Scan mode: choose between Off, PiP Scan, or Active Scan. PiP Scan: select "Single", "Double" or "Triple" Single: scans through the non-active channels in a single thumbnail. The channel set as full screen does not change. Double: scans through the non-active channels between two thumbnails. The channel set as full screen does not change. Triple: the full screen image and each of the three thumbnails alternate active channels. Active Scan: the full screen image and each of the three thumbnails alternate active channels. Manual Active Scan: Scanning will be in the order of inputs manually selected for PIP1, PIP2 and PIP3. Auto Active Scan: Scanning will be in consecutive order of HDMI inputs 1 through 4. Borders can be set for each image input. Aspect ratio can be maintained for all outputs.
Display Mode: Full Screen Mode: In full screen mode, one of the four video sources is displayed in full screen size and maximum resolution. Scan feature: cycle through four different sources at set intervals. USB touch screen monitors can be used to control the connected active computer.
Display Mode: Custom Mode: In Custom mode, each video source is displayed in its own separate, detached window. Size, position and selection of the windows are customizable. Use web server graphical user interface to configure settings for each window. Zoom, pan, and crop the image from any source to focus on key areas. Presets of the window positioning can be saved. Borders can be set for each image input. Display optional Left/Right VU level indicators for each corresponding display window. Chroma Key Setting provides the ability to superimpose elements from one video feed onto another video feed. Configure up to 10 preset layouts that can be switched live at any time.
Control Method: Front Panel Interface: Use front panel buttons to locally change ports or to select a display mode.
Control Method: Ethernet Control: Configuration can be done over the Internet/LAN via Web page or Telnet. Supports Internet Explorer 6.0 or higher, Firefox 2.0 or higher, Opera 9.0, Google Chrome, Safari 4.0 or higher for MAC and PC. Configure and control the settings for the system, network, input, output, and modes. Female RJ45 connector. 10/100 BaseT Ethernet interface. Web Server Security is ensured by password and user configurable timeout. Up to 16 users can access the web page at one time. The user with administrative privileges can access the following pages: System page: allows configuration of unit, serial port, and OSD settings. Network pages: configure IP and server settings. Inputs page: allows configuration of the four video inputs. Output page: configure the video and audio output parameters. Modes page: allows selection and configuration of the output display mode. User Config page: add, configure, and view all users. Firmware page: update firmware for the SPLITMUX. Telnet Security is ensured by password. Menu commands are similar to RS232 commands. The telnet server listens on port 2000. Port 2000 is for an operator telnet session.
Control Method: On Screen Display (OSD): Select display modes and computers with On Screen Display (OSD). Use the front panel buttons or keyboard commands to operate the OSD. OSD controls for configuration and control of the system, network, input, output, and display modes. Access to OSD Mode can be limited by an administrator-assigned PIN number.
Control Method: RS232: Configuration and control can be done through the serial port. Female RJ45 connector. Control the multiviewer using the Text Menu via RS232. Selectable baud rate: 1200 to 115,200 bps. Baud rate is set via the front panel interface, serial command, OSD, or web interface.
Control Method: Infrared Remote Control (Optional): Optional control method. IRT-UNV is sold separately. Routes video and audio signals together or independently. Transmitter can be up to 30 feet (9.1 meters) away. Power: two AAA batteries (included).
Control Method:Keyboard/Mouse: Use keyboard or mouse commands to select display mode and to select port.
Cables: Interface cables between the video sources/display and the multiviewer are required for proper operation. Use HD-xx-MM cable to connect an HDMI source or display. Use DVI-HD-xx-MM cablet o connect a DVI source/display. The cable does not pass audio to the multiviewer. Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer. Use USB2-AB-x-5T male USB Type A to male USB Type B interface cable between the computer and multiviewer. Cables not included.

CVA-HD-LC - Low-Cost Composite Video + Audio to HDMI Converter

DVI-HD-CNVTR - DVI to HDMI Converter

SPLITMUX-USBHD-4RT-2R - HDMI Quad Screen Multiviewer with Built-In KVM Switch: 1RU Dual Side-by-Side Rackmount

SPLITMUX-USBHD-4RT-R - HDMI Quad Screen Multiviewer with Built-In KVM Switch: 1RU Rackmount

VGAA-HD-ULC - Ultra Low-Cost VGA + Audio to HDMI Converter Cable

SPLITMUX-USBHD-4RT - Application Drawing 64 kb - Other

Project List

Configure Using HTTP-Based Text Commands 39307 kb - Instructions

Project List

SPLITMUX-USBHD-4RT - Data Sheet 449180 kb - Data Sheet

Project List

How to Configure SPLITMUX-USBHD-4RT Using HTTP-Based Text Commands (HTTP REST API) 43735 kb - Instructions

Project List

Installation and Operation Manual 5707338 kb - Instructions

Project List

DVI-HD-1M-MM
DVI-D Male to HDMI-A Male Cable - 1 m

DVI-HD-2M-MM
DVI-D Male to HDMI-A Male Cable - 2 m

DVI-HD-3M-MM
DVI-D Male to HDMI-A Male Cable - 3 m

DVI-HD-5M-MM
DVI-D Male to HDMI-A Male Cable - 5 m

HD-10-MM
HDMI Male-male cable - 10 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-15-MM
HDMI Male-male cable - 15 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-25-MM
HDMI Male-male cable - 25 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-30-MM
HDMI Male-male cable - 30 ft; Max Resolution: 1080p@120Hz

HD-3-MM
HDMI Male-male cable - 3 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-50-MM
HDMI Male-male cable - 50 ft; Max resolution: 1080p@120Hz

HD-6-MM
HDMI Male-male cable - 6 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

IRT-UNV
Infrared Remote Control

USB2-AB-0-5M-5T
USB 2.0 Cables, Male A to Male B

USB2-AB-10-5T
USB 2.0 Cables, Male A to Male B

USB2-AB-3-5T
USB 2.0 Cables, Male A to Male B

USB2-AB-5M-5T
USB 2.0 Cables, Male A to Male B

USB2-AB-6-5T
USB 2.0 Cables, Male A to Male B

Find a Dealer