Signal Routing / Switching : routeing and Matrix Switchers : Network Technologies Inc. (NTI) - SM-32X8-15V-LCD

VGA Video Matrix Switch: 32X8

Series: VEEMUX®

Model: SM-32X8-15V-LCD

Configure and control the switch through Ethernet, serial port, front panel buttons, or optional IR remote control.
NTI Switch Control Program with Graphical User Interface (GUI control) is included with the product.
Equipped with Liquid Crystal Display (LCD) for front panel operation.
Switch VGA video directly.
Each output provides one video signal.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The VEEMUX® VGA Video Matrix Switch routes video from 32 computers to 8 displays (projectors, monitors, etc.) This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors. Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system. For more information, visit < a href="http://www.networktechinc.com/vmtx.html">http://www.networktechinc.com/vmtx.html< /a>

Configure and control the switch through Ethernet, serial port, front panel buttons, or optional IR remote control.
NTI Switch Control Program with Graphical User Interface (GUI control) is included with the product.
Equipped with Liquid Crystal Display (LCD) for front panel operation.
Switch VGA video directly.
Each output provides one video signal.
Each input can be independently connected to any or all outputs.
Video bandwidth is 200 MHz or greater.
Supports 1920x1200 video resolution at a refresh rate of 85 Hz.
Stand-by mode offers reduced power. Available on 4- and 8-input models.
All units pass vigorous testing with 24 hr minimum burn in, heat testing, and load test of all ports.
The VEEMUX switch is the ideal solution for any application where information from many computers is being presented.
Examples include: digital signage, classrooms, boardrooms, trade shows, conference and entertainment facilities, courtrooms, command centers, and control rooms.

Matrix Switcher Video Input Type - Other
Rackmountable - Yes
ROHS Compliant - Yes
Routing Type - Video
Supported Resolution - WUXGA (1920x1200)
Switcher Type - Video
Warranty - Yes
Spec Sheet available - Yes

Video Input: Thirty-two female 15-pin HD connectors. Impedance: 75 Ohms.
Video Output: Eight female 15-pin HD connectors. 1920x1200 video resolution with no degradation. Impedance: 75 Ohms. Bandwidth: 200 Mhz, fully loaded.
Power: 110 or 220 VAC at 50 or 60 Hz via IEC connector. Power consumption: 15 W
MTBF: 56,080 hrs
Cables: Interface cables between the computers and the switch are required for proper operation. Recommended NTI video cables: VGA interface cable (VEXT-xx-MM). VGA to BNC cable (VINT). Cables not included.
Environmental: Operating temperature: 32 to 100°F (0 to 38°C). Storage temperature: -20 to 140°F (-30 to 60°C). Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Warranty (Length/Type): Two years.
Operating Temperature (Maximum): 37.78 C
Operating Temperature (Minimum): 0 C
Certifications: CE, FCC, RoHS
Input Impedance: 75 ohm
Number of Inputs: 32
Number of Outputs: 8
Number of Video Inputs (Analog): 32
Number of Video Outputs (Analog): 8
Output Impedance: 75 ohm
Rack Units (Height): 2
AC Voltage (Maximum): 220 Volts
AC Voltage (Minimum): 110 Volts
Active Power: 15 Watt
Depth: 304.80 mm
Height: 88.90 mm
Width: 482.60 mm
Regulatory Compliance: CE, FCC, RoHS, TAA compliant

SM-16X12-15V-LCD - VGA Video Matrix Switch: 16X12

SM-16X16-15V-LCD - VGA Video Matrix Switch: 16X16

SM-16X4-15V-LCD - VGA Video Matrix Switch: 16X4

SM-16X8-15V-LCD - VGA Video Matrix Switch: 16X8

SM-32X16-15V-LCD - VGA Video Matrix Switch: 32X16

SM-8X2-15V-LC - VGA Video Matrix Switch: 8X2

SM-8X4-15V-LC - VGA Video Matrix Switch: 8X4

SM-8X8-15V-LC - VGA Video Matrix Switch: 8X8

SM-nXm-15V-LC - Application Drawing 1 38 kb - Other

Project List

SM-nXm-15V-LC - Application Drawing 2 65 kb - Other

Project List

SM-nXm-15V-LC - Data Sheet 1516 kb - Data Sheet

Project List

SM-nXm-15V-LCD - Installation and Operation Manual 1091 kb - Instructions

Project List

IRT-UNV
Infrared Remote Control

VEXT-1.5-MM
VGA Cable, Male to Male - 1.5 ft

VEXT-10
VGA Cable, Male to Female - 10 ft

VEXT-100
VGA Cable, Male to Female - 100 ft

VEXT-10-MM
VGA Cable, Male to Male - 10 ft

VEXT-15-MM
VGA Cable, Male to Male - 15 ft

VEXT-25-MM
VGA Cable, Male to Male - 25 ft

VEXT-3-MM
VGA Cable, Male to Male - 3 ft

VEXT-6-MM
VGA Cable, Male to Male - 6 ft

VINT-5B-6
VGA to 5 BNC Connector Cable, Male to Male - 6 ft

Find a Dealer