Control Systems : External Sensors : Network Technologies Inc. (NTI) - E-LLS-SF-10CM

Stainless Steel Vertical Liquid Level Float Switch

Series: ENVIROMUX

Model: E-LLS-SF-10CM

Vertically mounted float switch – install in the top or bottom of the tank.
Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
Single-pole single-throw (SPST) circuitry.
Configure for normally open or normally closed circuit connection. When installed on top of the tank and used for sensing when liquid rises to a certain level, the sensor will be "normally closed" and will open when the liquid reaches that level. When installed on the bottom of the tank with liquid already there and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
IP68-rated water and dust protection.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Liquid, Water & Chemical Level Float Sensors compatible with ENVIROMUX® E-2D, E-5D and E-16D

For more information, visit http://www.networktechinc.com/liquid-level-float-sensor.html

Vertically mounted float switch – install in the top or bottom of the tank.
Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
Single-pole single-throw (SPST) circuitry.
Configure for normally open or normally closed circuit connection. When installed on top of the tank and used for sensing when liquid rises to a certain level, the sensor will be "normally closed" and will open when the liquid reaches that level. When installed on the bottom of the tank with liquid already there and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
IP68-rated water and dust protection.
Connect to digital input or RJ45 sensor port on an E-2D/5D/16D. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.

Warranty - Yes

Includes: two butt splice connectors for extending the cable length up to 1,000 feet.
Electrical rating: AC 220V/1A; DC 24V/0.5A
Wire gauge: 26 AWG
Stem Length: 3.93 in (100 mm)
Cable Length: 15.75 in (40 cm)
Operating Temperature (Minimum): -20 C
Max pressure: 217.5 psi (1.5 MPa)
Float specific gravity: 0.7
Float Diameter: 1 in (25 mm)
Mounting thread: M10x1.5
Operating Temperature (Maximum): 90 C
Material: SUS304 /SUS316L stainless steel

E-16D - Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,000 data log entries; 1,000 event log entries.

E-16DEL - Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,200,000 data log entries; 3,000 event log entries.

E-2D - Small Enterprise Environment Monitoring System

E-5D - Medium Enterprise Environment Monitoring System

E-5D-IND48VLT - Industrial Medium Enterprise Environment Monitoring System, 48VDC Power

E-5D-INDLT - Industrial Medium Enterprise Environment Monitoring System

E-LLS-PF - Plastic Vertical Liquid Level Float Switch

E-LLS-SF-25CM - Stainless Steel Vertical Liquid Level Float Switch

E-MICRO-TRH - Micro Environment Monitoring System / Remote Temperature/Humidity Sensor over IP, Integrated Temp/Humidity Sensor. One power supply included.

E-MICRO-TRH-D - Micro Environment Monitoring System / Remote Temperature/Humidity Sensor over IP, Integrated Temp/Humidity Sensor, DIN Mounted. One power supply included

E-MICRO-TRH-TAA - Micro Environment Monitoring System, Integrated Temp/Humidity Sensor. One power supply included. TAA compliant.

Find a Dealer