Environment Monitoring System
Sensor Accessories Sensor accessories compatible with E-2D, E-5D and E-16D
Control via SNMP:
- Requires read-write community configuration.
- Digital inputs are fixed values (not writable) while output relays are writable.
- Locate OIDS using a MIB browser.
Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Knowledge Base
For more information, visit http://www.networktechinc.com/io-expander.html
- Adds 16 digital inputs and 16 digital normally-open relay contact outputs to the E-2D/5D/16D. Interfaces with the E-2D/5D/16D via the RJ45 Sensor Port.
- Digital inputs: 16 screw terminal pairs for connecting dry contact devices. One screw terminal pair for tachometer; 0 to 255 Hz. Accepts 26 to 16AWG wire. Potential free. Voltage range: 0 to +36VDC. Over-voltage surge protected.
- Digital outputs: 16 screw terminal pairs for normally-open relay contact outputs. Accepts 26 to 16AWG wire. Potential free. Rated switching load: 0.5A @ 125VAC, 1A @ ±30VDC, 0.5A @ ±48VDC. Galvanic isolation: 1kV. Fused.
- Supports CAT5/5e/6 cable up to 500 ft. (152.4 m)
- Control via SNMP: Requires read-write community configuration. Digital inputs are fixed values (not writable) while output relays are writable. Locate OIDS using a MIB browser.
- Includes 5V/3A power supply.
- Current consumption: 75mA @ 5VDC
- Compatible with E-2D/5D/16D.
- Available options: desktop unit with wall mounting brackets, 1RU rackmount unit, dual side-by-side rackmount units in 1RU.
- Compatible with E-FSC Fiber Converter/Extender. Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
