Power Distribution : Power Protection - Surge Protectors and Suppressors : LynTec, Inc. - SGX20-4

Power Conditioning Surge Suppressor with 4 Module Units

Series: SGX20

Model: SGX20-4

Available in 4 module units
Factory installed in LynTec sidecars and ships attached to Lyntec panels
Advanced series mode surge protection
Advanced impedance tolerant EMI/RFI filtering
Self-test circuit with visual indicator

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The SGX20 shall be housed in a steel enclosure. It shall operate from 120 volts AC and have a barrier strip accessible through knock-outs in the enclosure for hardwiring power input and output connections.

The SGX20 shall have a load rating of 20 amps per circuit at 120 volts, a self-test circuit with visual indicator and provide EMI/RFI filtering. It shall meet Federal Grade A, Class 1, Mode 1 guidelines for powerline surge suppressors and withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts.

Available in 4 module units
Factory installed in LynTec sidecars and ships attached to Lyntec panels
Advanced series mode surge protection
Advanced impedance tolerant EMI/RFI filtering
Self-test circuit with visual indicator
10-year warranty

UL Rated - Yes
Warranty - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 35 C
Operating Temperature (Minimum): 5 C
Certifications: UL, ETL, CSA
Current Rating: 20 Amps
UL Rated: Yes
Warranty (Length/Type): 10 Years Limited
Load Rating: 20 amps per circuit at 120 volts
Power Requirement (no load): 15 watts per circuit
Surge Let-Through Voltage (6000-volt surge): 0 V
UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, B3 pulse
Measured suppressed voltage: 170 volts; no failures
Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load): 40 dB at 100 kHz; 50 dB at 300 kHz; 50 dB at 3 MHz; 50 dB at 30 MHzEMI/RFI Filter, Common Mode (50-ohm load):18 dB at 300 kHz; 30 dB at 1 MHz; 50 dB at 5 MHz; 50 dB at 20 MHz
Maximum Applied Surge Voltage: 6000 V
Maximum Applied Surge Current: Unlimited, due to current limiting
Maximum Applied Surge Energy: Unlimited, due to current limiting
Endurance (C62.41-1991 category B3 pulses): 1 kV>500,000; 3 kV>10,000; 6 kV>1000
Humidity Range: 5 to 95 % R.H ( Non-condensing)

Surge Suppressor 447 kb - Brochure

Project List

Surge Suppressor 258 kb - Data Sheet

Project List

Surge Suppressor 445 kb - Data Sheet

Project List