The PHPM-3F-120-WH is a 3-wire fluorescent power module, provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron Hi-lume and Eco-10 (Eco Series) line-voltage control electronic dimming ballasts. Utilizes Softswitch arcless switching technology. Up to 3 power modules may be wired on a single GRAFIK Eye zone. 120V control voltage, 120V load voltage and 16A/1920W capacity. 50/60Hz frequency, phase-to-neutral. Operates Lutron Hi-lumeR, Eco-10 (Eco series), Compact SET, EcoSystem, and EcoSystem compact line-voltage control electronic dimming ballasts with a smooth continuous square law dimming curve.
Provides air-gap off. Module protects itself during temporary over-current conditions on dimmed output. Two LEDs on front of unit provide diagnostic information (visible when faceplate is removed). Accept up to two 12AWG (2.5mm2) wires. Indoor use only. 15 BTU/hour maximum heat output of module. Surface or recess mount. Power module is UL tested.
- Provides capability for zone on GRAFIK EyeR control unit to dim fluorescent lights that have Lutron Hi-lume and Eco-10 line-voltage control electronic dimming ballasts
- Utilizes Softswitch arcless switching technology
- Up to 3 power modules may be wired on a single GRAFIK Eye zone
- 120V control voltage
- 120V load voltage
- 16A/120V, 1920W capacity
- 50/60Hz frequency, phase-to-neutral
- Phase independent of control device/control voltage
- Indoor use only
- 15 BTU/hour maximum heat output of module
- Surface or recess mount
- UL tested
