Power Distribution : Power Sequencer & Power Control Devices : Lowell Manufacturing Company - SEQR-4

4-step Low Voltage Rackmount Sequencer, Rocker Switch

Series: SEQ

Model: SEQR-4

Front mounted LEDs indicate status of connected equipment; front adjustable delay allows .5-10 seconds between steps.
Four rear-access barrier strip control outputs
Contacts for connecting remote switches
Alarm interface for use where required by local building code.
Each of the four control outputs includes switch contacts for connection to remote power control-activated equipment and auxiliary dry contacts for sequentially activating accessory systems such as projector screens, lighting, etc.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Low voltage, 4-step sequencers provide time-delayed activation and deactivation of equipment connected to remote power controls or accessory systems. The 1U chassis mounts in minimal rack space to sequentially activate equipment connected in the same rack or in remote locations. Select rocker or key activation switch.

Front mounted LEDs indicate status of connected equipment; front adjustable delay allows .5-10 seconds between steps.
Four rear-access barrier strip control outputs
Contacts for connecting remote switches
Alarm interface for use where required by local building code.
Each of the four control outputs includes switch contacts for connection to remote power control-activated equipment and auxiliary dry contacts for sequentially activating accessory systems such as projector screens, lighting, etc.
Steel chassis with rocker or key switch. 19"W x 1.75"H x 9"D. Black.
UL?Listed power supply with input 100-240VAC, output 24VDC, 500mA, 6 ft. cord and four plug adaptors — NEMA 1-15 for North America (factory installed) Schuko CEE 7/16 for central Europe, BS1362 for the U.K., AS3112 for Australia/New Zealand.
Made in U.S.A. with domestic and imported components

Warranty - Yes
Spec Sheet available - Yes

Number of Sequence Events: 4
Rackmountable: Yes
Height: 44.45 mm
Width: 482.60 mm
Depth: 228.60 mm
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Current Draw: 0.50 Amps
Colour: Black
Warranty (Length/Type): Limited

1604-SEQR4.pdf 611075 kb - Data Sheet

Project List

Suggested Products

Xtend XPC Standalone Power Controller

by LynTec, Inc.

Locking Switch Set

by LynTec, Inc.

3-phase 4-wire 120V Modular Sequencing Load Center with 41 Circuits, Main Lug

by LynTec, Inc.