Racks : Racks & Rack Frames : Lowell Manufacturing Company - LWSR-1222

12U Swing-Out Wall-Mount Rack, 22-inch Depth

Series: LWSR

Model: LWSR-1222

Backbox has two center locks (keyed differently than optional front door), 16" mounting centers, 10"W center wiring path, and removable knockout panels on top/bottom featuring 0.5" knockouts for wireless antennas; 0.75-0.5" and 1.5"-1.0" compound knockouts
Mounting section connects to backbox with right or left-hand swing and features welded sides with top/bottom vents, 1 pair fixed position front rails (tapped 10-32 and marked with RU increments) recessed from frame to allow 1.38" clearance for equipment kn
Backbox measures 28.825"H x 3.65"D x 23.06"W
Mounting Section measures 25.38"H x 18.178"D x 23.06"W. 12 rack units.
Overall measurements 28.825"H x 21.92"D x 23.06"W

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Economical, two-part rack features 16 gauge steel backbox and a mounting section that attaches with two heavy duty bolts through steel fasteners/securing nuts. Optional front door available separately.

Backbox has two center locks (keyed differently than optional front door), 16" mounting centers, 10"W center wiring path, and removable knockout panels on top/bottom featuring 0.5" knockouts for wireless antennas; 0.75-0.5" and 1.5"-1.0" compound knockouts
Mounting section connects to backbox with right or left-hand swing and features welded sides with top/bottom vents, 1 pair fixed position front rails (tapped 10-32 and marked with RU increments) recessed from frame to allow 1.38" clearance for equipment kn
Backbox measures 28.825"H x 3.65"D x 23.06"W
Mounting Section measures 25.38"H x 18.178"D x 23.06"W. 12 rack units.
Overall measurements 28.825"H x 21.92"D x 23.06"W
Includes PilotPoint™ screws with captive washers and 5/16” allen wrench
Load capacity 150 lbs.
Made in the U.S.A. with 100% certified U.S. steel
Black wrinkle powder epoxy finish; beveled corners
EIA/TIA compliant
Installation note: Backbox and mounting section are boxed together. Mounting section provides 90 degree open swing access for servicing and requires a minimum swing clearance equivalent to mounting section depth (18.178") plus 1" for optional front door.

Rack Rails - Yes
Rack Type - Wallmount
ROHS Compliant - Yes
Security (Locking) - Yes
Warranty - Yes
Spec Sheet available - Yes

Exterior Depth/Length: 556.77 mm
Exterior Height: 732.15 mm
Exterior Width: 585.72 mm
Mounting Width: 482.60 mm
Maximum Load Capacity: 68.04 kg
Construction: Certified US Steel
Rack Units (Height): 12
Depth: 556.77 mm
Height: 732.15 mm
Width: 585.72 mm
Shipping Weight: 34.93 kg
Colour: Black wrinkle powder epoxy
Warranty (Length/Type): Limited

1591-LWSR1222.pdf 761640 kb - Data Sheet

Project List

Suggested Products

Dante-equipped I/O Rack

by Yamaha Commercial Audio Systems, Inc.

I/O Rack

by Yamaha Commercial Audio Systems, Inc.

Preconfigured System Rack for TGX Series Amplifiers

by Dynacord