Racks : Racks & Rack Frames : Lowell Manufacturing Company - LER-4432

44U Stand-Alone Floor Rack, 32-inch Depth

Series: LER

Model: LER-4432

Fully welded 16-ga. steel frame with 14-ga. base, reinforced at load-bearing junctions for strength equivalent to 11-ga. steel.
Open front with beveled corners and vents above and below main opening. Clearance from rails to outside frame (flush) is 1.75." A surface-mount front door is available as an option.
Includes recessed rear door with vents and key lock. Door can be omitted by ordering Model No. LER-4432-LRD. Combination knockout panels above and below rear door include .5" for wireless antennas, .75-.5" and 1.5-1" for conduit. A blank project panel is l
Top features 10U opening with riveted rails, taped 10-32, which can be closed with 2 black steel panels included as shipping stiffeners. Optional 19" accessories can also be mounted here. The top also features a 6"D rear plane with 3 combination knockouts
14-ga. steel frame base with full size opening facilitates floor entry of cables. The base has provisions to readily accept mounting an optional mobile or stationary platform base or leg levelers, as well as anchor bolts (not included). Includes grounding

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The LER enclosed or stand-alone floor rack offers solid structural support for electronics. Includes rear door. Front door is optional (order separately).

Fully welded 16-ga. steel frame with 14-ga. base, reinforced at load-bearing junctions for strength equivalent to 11-ga. steel.
Open front with beveled corners and vents above and below main opening. Clearance from rails to outside frame (flush) is 1.75." A surface-mount front door is available as an option.
Includes recessed rear door with vents and key lock. Door can be omitted by ordering Model No. LER-4432-LRD. Combination knockout panels above and below rear door include .5" for wireless antennas, .75-.5" and 1.5-1" for conduit. A blank project panel is l
Top features 10U opening with riveted rails, taped 10-32, which can be closed with 2 black steel panels included as shipping stiffeners. Optional 19" accessories can also be mounted here. The top also features a 6"D rear plane with 3 combination knockouts
14-ga. steel frame base with full size opening facilitates floor entry of cables. The base has provisions to readily accept mounting an optional mobile or stationary platform base or leg levelers, as well as anchor bolts (not included). Includes grounding
Welded side panels with vents at top and bottom are designed to accept optional fan kits.
Includes 2 pr. rails (tapped 10-32) with printed rack unit scale for quick set-up. Rails are fully adjustable and can be set anywhere along side rail supports. Rear rails are optional.
Cable Management: Combination knockouts above and below rear door.
Vents in top, sides, and rear door are made to accept optional fan kits.
Black wrinkle powder epoxy finish
Hardware PilotPoint™ screws with captive washers.

Casters (Mobile) - Yes
LTL Shipping
Palletized Shipping
Rack Rails - Yes
Rack Type - Standalone
ROHS Compliant - Yes
Security (Locking) - Yes
Warranty - Yes
Spec Sheet available - Yes

Construction: Welded Certified US Steel
Maximum Load Capacity: 1428.82 kg
Depth: 812.80 mm
Regulatory Compliance: UL2416, EIA
Width: 585.72 mm
Height: 2111.50 mm
Exterior Depth/Length: 812.80 mm
Exterior Height: 2111.37 mm
Exterior Width: 585.72 mm
Interior Depth/Length: 745.24 mm
Mounting Width: 482.60 mm
Rack Units (Height): 44
Shipping Weight: 107.05 kg
Colour: Black wrinkle powder epoxy
Warranty (Length/Type): Limited

1478-LER4432.pdf 878665 kb - Data Sheet

Project List

Suggested Products

Amplifier System Rack 3x TGX20-US

by Dynacord

All-In-One Headend Rack Unit

by Lencore

Dante-equipped I/O Rack

by Yamaha Commercial Audio Systems, Inc.