Racks : Racks & Rack Frames : Lowell Manufacturing Company - LER-2122-LRD

Rack-Enclosed-21U, 22in Deep, 1pr Adj Rails, Less Rear Door, Black

Model: LER-2122-LRD

Construction: : Fully welded certified U.S. steel, 16- gauge frame with seamless side frame construction and 14-ga. bottom reinforced at load-bearing junctions for robust support, strength equivalent to 11-ga. steel. Black wrinkle powder epoxy finish. Bev
Front: Upper and lower vents. Frame nutserts are ready to add optional surface-mount door (left or right swing). Order front door separately
Rear: Removable knockout panels in frame above and below door feature combination EKOs for conduit (1/2"–3/4" and 1"–1-1/2") and KOs for wireless antennae (1/2"). Removable blank project panel in frame below door. Standard model includes recessed door wit
Sides (welded): Welded side panels with vents at top and bottom
Bottom (open access): Includes 10-32 threaded grounding stud in corner, 3/8"-16 threaded T-nuts for (optional) leg levelers, and holes for anchor bolts (by others). Opening is 17.88"D x 19.94"W

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The EIA/TIA compliant 19" floor rack shall be Lowell model #LER-2122 with overall dimensions of 42.875"H x 22.00"D x 23.06"W; usable height of 21 rack units and usable depth of 19.34". Rack construction shall be fully welded certified U.S. steel with 16-gauge frame and 14-gauge bottom reinforced at load-bearing junctions, all with black wrinkle powder epoxy finish. Welded sides shall feature vents at top and bottom. The rack shall include a recessed rear door with vents and key lock, removable knockout panels above and below door with 1/2" KO for wireless antennae, 1/2"–3/4" and 1"–1-1/2" EKO for conduit and a blank project panel. The front shall feature vents along top and bottom, and provisions to accept an (optional) surface-mount door with left or right hand swing. The closed steel top shall feature two vents. Rack bottom shall have an opening measuring 17.88" x 19.94" and include a grounding stud. Rack shall include 1 pair of (21U) adjustable 11-gauge steel rails tapped 10-32 on 19" E.I.A. spacing with black finish and numbered rack unit increments. The UL 2416 Listed rack shall be manufactured in the U.S.A. with a UL Listed load capacity of 500 lbs.

Construction: : Fully welded certified U.S. steel, 16- gauge frame with seamless side frame construction and 14-ga. bottom reinforced at load-bearing junctions for robust support, strength equivalent to 11-ga. steel. Black wrinkle powder epoxy finish. Bev
Front: Upper and lower vents. Frame nutserts are ready to add optional surface-mount door (left or right swing). Order front door separately
Rear: Removable knockout panels in frame above and below door feature combination EKOs for conduit (1/2"–3/4" and 1"–1-1/2") and KOs for wireless antennae (1/2"). Removable blank project panel in frame below door. Standard model includes recessed door wit
Sides (welded): Welded side panels with vents at top and bottom
Bottom (open access): Includes 10-32 threaded grounding stud in corner, 3/8"-16 threaded T-nuts for (optional) leg levelers, and holes for anchor bolts (by others). Opening is 17.88"D x 19.94"W
Closed Top (with vents): Steel top with two vents
Cable Management: Combination knockouts in rear
Rack Rails - 18U (fully adjustable): One pair of 11-ga. steel 10-32 threaded rails on E.I.A. spacing with bi-directional numbered RU increments (rails mount in either direction). Black finish. Clearance from front rail to outside frame (1.75"), from front
Hardware: Black pilot point screws with captive washers for quick installation. (25)
Compliance: EIA/TIA compliant. RoHS compliant. UL 2416 Listed in U.S.A. and Canada
UL Listed Load Capacity: 500 lbs. [227 kg]
Optional: Front door, additional rails, mobile or stationary base, leg levelers

Rack Type - Standalone
Spec Sheet available - Yes

Exterior Depth/Length: 558.80 mm
Exterior Height: 1089.15 mm
Exterior Width: 585.72 mm
Interior Depth/Length: 491.24 mm
Interior Height: 933.45 mm
Certifications: EIA/TIA compliant. RoHS compliant. UL 2416 Listed in U.S.A. and Canada
Rack Units (Available): 21
Rack Units (Height): 36.75
Depth: 558.80 mm
Height: 1089.02 mm
Width: 585.72 mm

1463-LER2122.pdf 749424 kb - Data Sheet

Project List

Suggested Products

Preconfigured System Rack for TGX Series Amplifiers

by Dynacord

Dante-equipped I/O Rack

by Yamaha Commercial Audio Systems, Inc.

1RU i.Net Quad OP A 1RU Rack Mount Unit

by Lencore