UMX?HDMI?140 ia a multiport VGA, DisplayPort, HDMI and DVI switch for universal 4K video and audio with an HDMI output. With the built-in Event Manager control feature it is the ultimate solution for huddle rooms and similar collaboration environments. This device was designed for digital and analog video and audio signals: VGA, YPrPb, DVI, HDMI 1.4 and DP 1.1 with analog stereo audio from local inputs or embedded 7.1 HDR audio.
- Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
- 3,5mm audio jack input
- 1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Audio embedding (or replace original audio)
- Adjustable analog audio settings (volume, gain, balance)
- Frame Detector (analyze detailed video timings)
- Compatible with Mac laptop and desktop computers with Thunderbolt port
- 5-pole Phoenix balanced analog audio connectors
- Mounting options for rack, furniture or truss
- External universal power adaptor
- Twist-and-lock DC power connector
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- DVI-I (Analog+Digital) input connection
- HDCP enable/disable function on input
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Multiple TCP/IP connections
- Device control via Ethernet (TCP/IP) and RS-232
- Advanced EDID Management
- Intuitive control software for device configuration
- GPIO control ports
- Front panel buttons for crosspoint control
- Supports HDMI 4K signal formats (4K UHD at 30Hz RGB 4:4:4 or at 60Hz YUV 4:2:0, up to 9 Gbps)
- Command injection on RS-232 and IR ports
- Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
- Built-in Event Manager automation feature
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Pixel Accurate Reclocking
- No video compression
- Bi-directional RS-232 extension (pass-through)
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Firmware upgrade through Ethernet
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Built-in video test pattern generator
- No signal latency, zero frame delay
