Audio Production Equipment : Audio Processors : Klark Teknik - DN514 Plus

Quad Auto Gate Dynamic Processor

Model: DN514 Plus

Four frequency-conscious high performance gates in one single unit of rack space
Optimised for fast set up and dependable triggering for every conventional gate application
With two semi-automatic Attack Modes and hold time automatically scaled to release value, the DN514 Plus combines outstanding dynamic performance with simplified control
Unique sync function synchronises harmony parts, brass section, etc., by interlocking all four gate release times
Advanced VCA design for low noise and distortion

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Quad auto gate dynamic processor. Two channels of full function compression, expansion, limiting and peak clipping in one unit of rack space. one of the industry standard multi-gate devices for both recording and live applications. Providing the same superb audio performance as its other 500 Plus - series, DN514 Plus packs four channels of frequency conscious gating into just 1RU. This provides a significant operational advantage, being able to tailor the operation of each gate to a specific frequency range.

Four frequency-conscious high performance gates in one single unit of rack space
Optimised for fast set up and dependable triggering for every conventional gate application
With two semi-automatic Attack Modes and hold time automatically scaled to release value, the DN514 Plus combines outstanding dynamic performance with simplified control
Unique sync function synchronises harmony parts, brass section, etc., by interlocking all four gate release times
Advanced VCA design for low noise and distortion
Additional key inputs for each channel allows triggering from external sources
Side chain monitor function simplifies filter set-up
Threshold and release LED’s provide visual information regarding gate status. Release contour indicated by release LED
Both Master and channel bypass switches are provided to aid set-up

Width: 482mm (19 inch)
Depth: 292mm (11.5 inch)
Height: 44.5mm (1.75 inch)
Inputs: Four
Input Type: Electronically balanced (pin 3 hot)
Input Impedance: 20kohms balanced
Key Inputs: Four
Key Input Type: Electronically balanced (tip hot)
Key Input Impedance: (ohms)
Balanced: 20 and 10 kohms
Audio Outputs: Four
Audio Output Type: Unbalanced (pin 3 hot)
Minimum Load Impedance: 600 ohms
Source Impedance: <60 ohms
Maximum Level: +21 dBu
Frequency response (20Hz-20kHz): ± 0.5dB
Distortion (at + 4dBu): <0.03% at 1kHz
Noise floor (20Hz-20kHz unweighted): -100 dBu
Gate closed: <-94 dBu
Gate open: < -100 dB
Attack programme: Related semi-automatic 50us to 200us "fast" 500us to 2ms "slow"
Hold/Release Variable: 40ms to 2sec
Threshold Variable: -40 to +20 dBu
Attenuation: >84dB Gate closed
High Pass Filter: 20Hz to 5kHz/12dB octave
Low Pass Filter: 80Hz to 20kHz/12dB octave
Audio Inputs/Outputs: 3 pin XLR
Power: IEC
Consumption: <30 VA
Sampling Rate/Frequency: 20 kHz
Sampling Rate/Frequency: 20 Hz
Sampling Rate/Frequency: 0 Ghz
Input Impedance: 20000 ohm
Output Impedance: 600 ohm
Depth: 292 mm
Height: 44.50 mm
Width: 482 mm
Product Weight: 4 kg
Shipping Weight: 6 kg

Klark Teknik - Full Line Brochure.pdf 4559 kb - Brochure

Project List

Find a Dealer

Suggested Products

Professional Rack Mountable Audio Induction Loop Driver, 9.2Arms

by Ampetronic

8K eARC Audio Processor

by AVPro Edge

128-channel Programmable Digital Audio Networkable Input Output Processing Node with 6 DSP Chips and Dante I/O

by MediaMatrix