The MSD-701AMP is a seven-input digital presentation switcher with built-in audio power amplifier.
The seven digital and two analog inputs accept a wide variety of video formats including HDMI, DVI, HDBaseT, Composite video, RGB, and YPbPr. Input video signals are converted to HDBaseT and HDMI signals at up to QWXGA or 1080p. Two selected input video signals can be displayed on a single screen in picture-in-picture or side-by-side layout.
Up to three audio can be mixed: one of digital audio/analog audio, one mic, and one line. Audio is output to digital connectors, an analog connector, and two speakers. Enhanced audio features include compressing, limiter, and seven-band equalizer for mic input and tone controls for speaker output.
The MSD-701AMP can be configured remotely from RS-232C and LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
Additionally, the MSD-701AMP includes key security lockout and button caps to prevent accidental or inappropriate changes.
- Resolution up to 1080p/QWXGA (Reduced Blanking)
- Motion adaptive interlaced/progressive conversion
- Two video combinations: PinP and side-by-side
- Scan conversion
- Aspect ratio control
- Seamless switching with one black frame
- Analog/Digital conversion
- Each video output OFF
- Anti-snow
- Up to 492 ft. (150 m) over Cat6 cable in Long reach mode*1
- Embedding/De-embedding
- Volume adjustment (Input/Output)
- Mic/Line level control
- Source volume control
- Lip Sync
- Audio Downmix
- Sampling rate conversion
- Audio mixing
- Compressor
- Limiter
- 7-band equalizer
- Tone control
- Automatic feedback suppressor
- High-impedance speaker output
- RS-232C
- LAN
- External button switch
- Control command output (e.g. controlling projectors)
- PJLink
- CEC (Control sink device power)
- Contact closure
- Power distribution unit control
- PoH (HDBaseT input)
- EDID emulation
- WEB browser control
- Input channel automatic switching
- Audio breakaway for independent audio and video switching
- Crosspoint memory
- Preset memory
- Last memory
- Connection Reset
- Button security lockout
- System check
- HDBaseT: RS-232C, LAN and CEC are supported
- Standby switch
- *1 For long reach mode, video signals up to 1080p (24 bit) can be transmitted to 492 ft. (150 m) at maximum
- if using with IDK's HDBaseT products supporting 328 ft. (100 m) transmission.
