Signal Processing Systems : Extenders : Hall Technologies - HBX

HDMI Extender With Ultra-HD AV, IR, RS232 and Ethernet (Sender + Receiver)

Model: HBX

Fully Compliant with HDBaseT standard
Supports virtually all HDMI and DVI resolutions including 4K UHD
Extends, Video, Audio, RS-232, IR, and Ethernet
Supports extension to 100m (330ft)
Fully isolates grounds between TX and RX sides

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The HBX HDMI extender kit is comprised of a compact Sender (HBX-S) and corresponding Receiver (HBX-R).

The kit is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100meters (328feet) using a single Cat6 cable. The extender supports all PC and HDTV Resolutions to 4K at 30 Hz 4:4:4 or 4K at 60 Hz 4:2:0.

The IR extension preserves the modulation (carrier) frequency and provides compatibility to most standards.

The Sender and the Receiver each include a universal 5v power supply. IR emitter and IR detector cables are also included.

Fully Compliant with HDBaseT standard
Supports virtually all HDMI and DVI resolutions including 4K UHD
Extends, Video, Audio, RS-232, IR, and Ethernet
Supports extension to 100m (330ft)
Fully isolates grounds between TX and RX sides
Compact, rugged, reliable, and economical
Plug and play, no configuration needed
Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs

Extender Type - HDMI
Extender Type - RS232
ROHS Compliant - Yes
Warranty - Yes

Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
Signal Type: TMDS
Resolutions: DVI signal - VGA (640x480) thru WUXGA (1920x1200); HDTV signal - 480i through 1080p; Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60m
Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD; Master Audio (32-192 kHz sample rate)
DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
CEC: Pass-Thru CEC for Consumer Electronics Control compatible devices
RS232: Bidirectional (full-duplex) any baud rate up to 115,200
Ethernet: 100BaseT Ethernet LAN
IR: Extended in both directions. Carrier modulation range from 30kHz to 60kHz
Power: Sender and Receiver: 10watts maximum
Temp/humidity: Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Cooling: Convection
Mounting: End plates with hole for surface mounting
Enclosure Type: Metal (Aluminum ends, Aluminum Extrusion)
Product Weight: Sender 9.3oz (0.58lb or 264g); Receiver 10oz (0.63lb or 284g); Kit (shipping) 37oz (2.3lb or 1050g) includes: sender, receiver, universal power supply, manual, and packaging
MTBF: 90,000 hours (Calculated Estimate)
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Certifications: CE, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2 Amps
DC Voltage: 5 Volts
Depth: 99.06 mm
Height: 25.40 mm
Width: 99.06 mm
Warranty (Length/Type): 3 Years

HBX-R - HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Receiver)

HBX-S - HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Sender)

UH2X-P1 - HDMI + USB + LAN over UTP Extender with HDBaseT™ and PoH (Sender + Receiver )

UHBX-3S - HDMI on HDBaseT™ 1x3 Splitter

Sender + Receiver 936111 kb - Other

Project List

Suggested Products

High Performance IP to Port Expander

by Aurora Multimedia Corporation

4K 18Gbps HDMI Extender via One CAT6/6a/7: Extend up to 197 feet

by Network Technologies Inc. (NTI)

4K 9Gbps DisplayPort HDBase-T Extender via One CAT6a/7

by Network Technologies Inc. (NTI)