The Densite series HRS-1801 is an expandable 10 x 4 routing switcher capable of switching HD and SD-SDI, as well as compressed domain signals such as ASI or SSI/SMPTE-310M, available in non-reclock, reclock and clean/silent switching configurations. The HRS-1801 can occupy as few as three slots of a Densite frame, which makes it a highly compact routing solution. The 10 inputs can be easily expanded up to 40 inputs by increments of 10, providing 20x4, 30x4 and 40x4 routing configurations.
The HRS-1801 is available in non-reclock, reclock and clean/silent switching configurations. In clean switch mode, the HRS-1801 offers the flexibility to tie two clean outputs (leaving two independent buses), or to provide one clean signal plus three independent non-clean outputs.
The HRS-1801 can be controlled by Ethernet, using a dedicated control panel (RCP-10x0) or the iControl/ iRouter software. Two serial RS-422 ports are avail¬able for control by automation systems.
- Highly integrated 10x4 router
- Supports HD-SDI, SD-SDI, ASI and SSI/SMPTE-310M
- Easy expansion up to 40x4 by increments of 10 inputs
- Basic 10x4 non-reclocked configuration
- Software options for reclocking and clean switch configurations
- Two line timing window with clean switch option
- Reference input with passive loop through
- Ethernet control via iControl, or dedicated control panel (RCP-10x0 series)
- Serial control via RS-422 for automation control (support for SW2 and 8 protocols)
- Thumbnail and audio level meter streaming
