Audio Production Equipment : Analyzers : Gold Line - APT2B

Absolute Polarity Tester with Pulse Generator & Balanced Output

Model: APT2B

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Gold Line Polarity Analyzers utilize state of the art signal processing to accurately determine absolute polarity which is unimpaired by passive crossovers or signal waveform distortions produced by the device under test.

The APT2 works on tweeters, mid-ranges, woofers, subwoofer speakers and cabinets, equalizers, amplifiers and crossovers.

With this handy instrument an entire speaker system can be checked in only seconds.

The Polarity Detector (APT) and Pulse Generator (PG) are supplied as separate units.

U.S. PATENT 5,319,714

The NEW APT2B offers all the features and convenience of the original APT2 plus balanced outputs and inputs.

Tester Format - Handheld
Analyzer Signal Type - Other

Inputs, Balanced - APT2B::
PG: None
APT: 1/4" Phone jack - auxiliary microphone input - impedance 20k ohms
........: 3Pin Female XLR - auxiliary microphone input - impedance 20k ohms
Outputs, Switchable - APT2B::
PG: 1/4" Phone jack - Unbalanced - to drive loudspeaker directly - impedance 4 - 16 ohms
........: 3Pin Male XLR - Unbalanced - to drive loudspeaker directly - impedance 4 - 16 ohms
or:
......: 1/4" Phone jack - Balanced - to drive amplifier directly - impedance 50 ohms
........: 3Pin Male XLR - Balanced - to drive amplifier directly - impedance 50 ohms
APT: None
APT Microphone: Built-in omnidirectional electret condenser.
Required Acoustic Level At APT: 70dBc to >110dBc.
APT Display:
Single LED for positive-going pulse polarity. 300ms ON duration.
Single LED for negative-going pulse polarity. 300ms ON duration.
PG Display: Single LED positive-going pulse with 1s repetition rate.
PG Line Pulse Output:
Amplitude: APT2B - 0.8V peak typical.
Rise Time: <100 µs.
Fall Time: 40ms typical.
Duty factor: 0.3% typical.
Battery Drain: 1.1mA average.
PG Speaker Pulse Output:
Amplitude: 6.5V peak (14 watts) to 4 ohm loudspeaker.
Rise Time: <100 µs.
Fall Time: 1.5ms typical.
Duty factor: 0.15% typical.
Battery Drain: 3.2mA with 4 ohm loudspeaker.
Power Requirements:
PG: 9V battery
APT: 9V battery
Size (W x H x D); Weight:
PG: 3" x 51/2" x 1-3/4"; 7 oz.
APT: 3" x 51/2" x 1-3/4"; 7 oz.
Case Material: High impact ABS
Depth: 44.45 mm
Height: 139.70 mm
Width: 76.20 mm
Product Weight: 0.20 kg

Gold Line APT2B Manual.pdf 27 kb - Instructions

Project List

Find a Dealer

Suggested Products

1RU 12G-SDI for Real Time HDR Analysis with Waveform, Histogram and Vectorscope Monitoring

by AJA Video