Power Distribution : Power Sequencer & Power Control Devices : FSR, Inc. - SPC-15

SPC Series 15A Power Sequencer/Conditioner/Surge Suppressor

Series: Power Sequencer

Model: SPC-15

Fully solid state, zero crossing, AC switching, 15A capacity
Advanced surge suppression on all the AC outputs with LED indicating active protection
Line conditioning and RFI suppression on the AC input
Full sequencing on both power up and power down
Two AC outlets, one on the front and one on the rear, are active all the time

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

SPC-15 is an AC power conditioning and sequencing system, provides in depth surge protection as well as superior RFI suppression. It can be expanded to power any number of additional circuits all connected via a six wire low voltage line. It switches the line with solid state devices insuring an extremely long trouble free life, there are no mechanical relay contacts to arc or pit and disrupt the systems operation.

Fully solid state, zero crossing, AC switching, 15A capacity
Advanced surge suppression on all the AC outputs with LED indicating active protection
Line conditioning and RFI suppression on the AC input
Full sequencing on both power up and power down
Two AC outlets, one on the front and one on the rear, are active all the time
An alarm terminal to sequence the system down when tripped
19-inch rack mounted equipment occupying only one rack unit space

UL Rated - Yes
Spec Sheet available - Yes

UL Rated: Yes
AC Switching: Solid state zero crossing (no relay contacts that bounce, arc, and pit)
AC Input: Full line conditioning and RFI suppression
AC Outlets: Surge suppression on all outlets
Spike protection modes: Line to neutral, neutral to ground, line to ground
Spike protection voltage: Max clamping voltage 340V peak, L-N, N-G, L-G
Response Time: 1 ns
Maximum load protection: >100,000A (8 x 20 usec pulse)
Noise attenuation: Differential 13dB @ 150kHz increasing to 45dB at 30MHz
Common mode: 15dB at 150kHz, increasing to >45dB @ 30MHz
Switching Delay: 1 to 10 seconds adjustable on the rear panel
Remote Connector: Includes all connections for remote control of the unit (pluggable screw terminal connector)
Remote Control: Momentary or maintained closure will operate this equipment
Certifications: UL
Current Rating: 15 Amps
Number of Sequence Events: 3
Cord Length (in/mm): 1828.80 mm
Colour: Black
Warranty (Length/Type): 3 Years
AC Voltage: 120 Volts
Depth: 76.20 mm
Height: 139.70 mm
Width: 152.40 mm
Product Weight: 1.81 kg

SPC-15x - SPC Series Expansion Unit for SPC-15 Power Sequencer

SPC-20 - SPC Series 20A Power Sequencer/Conditioner/Surge Suppressor

SPC-20x - SPC Series Expansion Unit for SPC-20 Power Sequencer

FSR LIT1212 SPC-15 SPEC SHEET.pdf 1082 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor