Fibre Optic Systems : Fibre Optic Converters : Ensemble Designs - BE 81-F

HDMI to Optical and Electrical 3G/HD/SD SDI Converter

Series: BrightEye

Model: BE 81-F

Optical to HDMI converter
Optical to electrical converter
Use with video monitors that have HDMI Input
Use with HD or SD signals
3G HD, level A supported

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This HDMI to optical and electrical 3G/HD/SD SDI converter for converting optical HD or SD video feeds to HDMI and electrical. Convenient for feeding a video monitor, BrightEye 81-F provides a reliable way to monitor optical feeds in broadcast and mobile applications. BrightEye 81-F is an optical to HDMI and electrical converter for use with standard definition video signals and 3Gbps and 1.5Gbps high-definition signals. The video input is received on an optical LC connector, converted and then output on both a BNC connector and an HDMI connector. The HDMI output is not HDCP encrypted. For facilities using 3G, the issue of monitoring the signal becomes a challenge. A 3G video signal can be easily viewed via the HDMI output. Signal monitoring and control is provided through the included BrightEye Mac and BrightEye PC software.

Optical to HDMI converter
Optical to electrical converter
Use with video monitors that have HDMI Input
Use with HD or SD signals
3G HD, level A supported
Optical receiver
Passes embedded audio

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 4.44 C
Operating Temperature (Minimum): -17.78 C
AC Voltage: 230 Volts
DC Voltage: 12 Volts
Peak Power: 7 Watt
Depth: 139.70 mm
Height: 20.32 mm
Width: 142.87 mm
Warranty (Length/Type): 5 years
Number of input: 1
Input Type: HDMI 1.3
Supported SDI Standards: 1080i/720p/1080p/1080sF/1080p/525i/625i
Number of Serial Digital Output: 2, BNC
Serial Digital Output Signal Type: Follows input
Serial Digital Output Impedance: 75 ohms
Serial Digital Output Return loss: >15dB to 1.485GHz
Number of Optical Output: 1, LC/UPC
Optical Output Type: Follows input
Optical Output Wavelength: 1310 Nm (Non-CWDM)
Optical Output Power: -7 dBm
Maximum Optical Output Cable Length: 20 km
Optical output Fiber type: Single Mode
Relative Humidity: 0 to 95 % (Non-condensing)

BE81-F.pdf 497 kb - Data Sheet

Project List

Application Note - BrightEye Control Over Ethernet 543 kb - Other

Project List

Suggested Products

HDMI to 3G-SDI over Fiber Video and Audio Converter

by AJA Video

1-Channel Single Mode ST Fiber to 3G-SDI Receiver

by AJA Video

2-Channel 3G-SDI to Single-Mode LC Fiber Transmitter

by AJA Video