Fibre Optic Systems : Fibre Optic Converters : Ensemble Designs - BE 1

Analog/SD SDI to SD SDI/Optical Converter with TBC and Frame Sync

Series: BrightEye

Model: BE 1

Use with cameras, satellite receivers and VHS decks
Analog and SD SDI input
SD SDI and optical output
TBC and frame sync
12-bit processing

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This BrightEye 1 is a comprehensive analog/SD SDI to SD SDI/optical converter for signal acquisition. With analog component, analog composite S-Video (Y/C) and SDI video inputs, it can take on any video source. The built-in time base corrector/frame synchronizer provides a rock steady output, even with marginal inputs. The reference input is used to genlock the converter output to house reference such as color black. Front panel controls select input source, format and adjust video gain. Video levels can be adjusted through BrightEye Mac or PC software. Simultaneous SD SDI (electrical) and optical outputs are provided, so you can deliver the signal just about anywhere. Both Color Bars and the SD SDI Checkfield (Pathological) test patterns are included to facilitate transmission path testing.

Use with cameras, satellite receivers and VHS decks
Analog and SD SDI input
SD SDI and optical output
TBC and frame sync
12-bit processing
Passes embedded audio
Built-in time base corrector/frame synchronizer

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
AC Voltage: 230 Volts
DC Voltage: 12 Volts
Peak Power: 7 Watt
Depth: 139.70 mm
Height: 20.32 mm
Width: 142.87 mm
Product Weight: 0.40 kg
Warranty (Length/Type): 5 years
Number of Serial Digital Input: 1
Serial Digital Input Signal Type: 270Mbps SD Serial Digital (SMPTE 259M)
Serial Digital Input Impedance: 75 ohms
Serial Digital Input Return Loss: >15 dB
Number of Analog Input: 1
Analog Input Types: Beta/SMPTE, Y, Pr, Pb/NTSC, PAL Composite/NTSC, PAL S-Video
Analog Input Impedance: 75 ohms
Analog Input Return Loss: >40 dB
Number of Serial Digital Output: 1
Serial Digital Output Type: 270Mbps SD Serial Digital (SMPTE 259M)
Serial Digital Output Delay: <90 ms
Serial Digital Output Impedance: 75 ohms
Number of Optical Output: 1
Optical Output Type: 270Mbps SD Serial Digital (SMPTE 259M)
Optical Output Wavelength: 1310 Nm (non-CWDM/Optional: 1550nm)
Optical Output Power: -7 dBm
Optical Output Fiber Types: Single Mode/Multimode
Optical Output Connector: SC
Analog to SDI Performance Bit Resolution: 12 bits
Analog to SDI Performance Signal to Noise Ratio: >62 dB
Analog to SDI Performance Frequency Response: +/-0.1dB, 0 to 2.75/5.5MHz
Number of Reference Input: 1
Reference Input Types: 1V P-P Composite Video, PAL or NTSC
Reference Input Impedance: 75 ohms
Reference Input Return Loss: >40 dB
Relative Humidity: 0 to 95 % (Non-condensing)

BE1.pdf 538 kb - Data Sheet

Project List

Application Note - BrightEye Control Over Ethernet 543 kb - Other

Project List

Suggested Products

1-Channel 3G-SDI to Single Mode ST Fiber Transmitter

by AJA Video

1-Channel Single Mode LC Fiber to 3G-SDI Receiver

by AJA Video

LC Female to SC Male Simplex Singlemode Fiber Optic Adapter

by Network Technologies Inc. (NTI)