The 300 Clip Instant Access System consists of the ST300-SSM VTR Controller, STS420 Shotbox and Shotlist Software. SHOTLIST provides fast access to existing video clips stored in SONY SX Hybrids. The SHOTLIST contains up to 300 CLIP IDs, stored in non-volatile memory in the ST300. Any clip in the SHOTLIST can be quickly loaded by simply entering the associated 3-digit number of its location, then pressing [LOAD]. Press [PLAY] to play the clip. Press [RECUE] to recue to the beginning of the clip or to the "recalled" time if defined.
NOW, production switchers can load & play video clips on SONY SX Hybrids
Use the EMEM or SNAPSHOT Learn & Recall functions of the production
switcher, to load and play a video clip from a Recall or timeline
Use the Run and Trigger functions of the production switcher to Play, Stop or Recue the video clip
Instantly load a video clip at the press of a button
Instantly load a FILL clip & KEY clip at the press of ONE button, then play out both channels in sync
LOOP up to 3channels
Control up to 3 video channels individually or ganged
Throughout this document, the hard disk drive in the SX unit will be referred to as "Video Server"
HDD refers to the hard disk drive video recorder in the SX device
The ST300-S/SM as the ST300
The ST420SHOTBOX is referred to as "SHOTBOX"
SHOTKEY refers to the 1-30 switches on the SHOTBOX
Words surrounded by brackets, for example, [ENTER], are keys on the ST 300 or SHOTBOX
[XXX] + [XXX] means hold the two keys down simultaneously
"Softkeys" are the row of keys directly below the display that perform multiple functions in Menu and other modes
Power (ST300):
90 to 265 VAC Adapter supplied with IEC connector
Size (ST300):
12 x 6 x 1.5 (front) 3 (rear) inch (L x W x H)