DM Lite 4K60 4:4:4 Receiver for HDMI and Analog Audio Signal Extension over CATx Cable

Model: HD-RXA-4KZ-101

Part #: 6511921

Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher
Point-to-point extension of HDMI® and analog audio signals over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The HD-RXA-4KZ-101 is a DM Lite® 4K60 4:4:4 receiver designed to interoperate with a DM Lite® transmitter or DMPS Lite™ switcher for the transmission of HDMI® and analog audio signals. A CAT5e or higher twisted pair cable is used to connect the HD-RXA-4KZ-101 to the DM Lite transmitter or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1

Interoperability with a DM Lite Transmitter or DMPS Lite Switcher

The DM Lite input port of the HD-RXA-4KZ-101 must be connected to a DM Lite output port of a DM Lite transmitter or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 transmitters are the HD-TX-4KZ-101, HD-TX-4KZ-111, HD-TXA-4KZ-101, HD-TXC-4KZ-101, and HD-TXCA-4KZ-101. Supported DM Lite 4K60 4:2:0 transmitters are the HD-TX-101-C-E, HD-TXC-101-C-E, HD-TX-301-C-E, HD-TX-101-C-1G-E, HD-TXC-101-C-1G-E, and HD-TX-201-C-2G-E. Supported DMPS Lite switchers are the HD-PS622, HD-PS621, HD-PS402, and HD-PS401.

The HD-RXA-4KZ-101 can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-RXA-4KZ-101. In addition, control system programming and .AV Framework™ software support of the HD-RXA-4KZ-101 is hosted by the switcher.

4K60 4:4:4 and HDR Support

The HD-RXA-4KZ-101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

Analog Audio De-Embedding

The analog audio output port of the HD-RXA-4KZ-101 enables 2 channel LPCM audio to be extracted from the AV signal.

Compact, Surface-Mountable Design

Compact in design, the HD-RXA-4KZ-101 can be mounted onto a flat surface such a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-RXA-4KZ-101 can receive power from the included power pack or from the remote DM Lite transmitter or DMPS Lite switcher.

Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher
Point-to-point extension of HDMI® and analog audio signals over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Compliance with HDCP 2.3
Analog audio de-embedding
CEC (Consumer Electronics Control) pass-through capability
EDID pass-through capability
Compact, surface-mountable design
Power from 24VDC power pack (included) or from remote DM Lite transmitter or DMPS Lite switcher

Receiver/Transmitter Cable Type - Other
Receiver/Transmitter Format Type - HDMI
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - WQXGA (2560x1600)
Supported Resolution - Other
Warranty - Yes
Spec Sheet available - Yes

DC Voltage: 24 Volts
Certifications: CE, IC, FCC
Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Current Draw: 2.50 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Transmission Range: 7010.40 cm
Depth: 27.43 mm
Height: 104.90 mm
Width: 106.17 mm
Product Weight: 0.34 kg
Video:
•Input Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2
•Output Signal Type: HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support (DVI compatible)4
•Copy Protection: HDCP 2.3
Audio:
•Input Signal Type: DM Lite
•Output Signal Type: HDMI
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
•Analog Format: Stereo 2-channel
•Digital-to-Analog Conversion: 24-bit 48 kHz
•Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB; S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted; THD+N: <0.005% at 1 kHz; Stereo Separation: 80 dB
COMMUNICATIONS:
•HDMI: HDCP 2.3, EDID, CEC pass-through
•DM Lite: HDCP 2.3, EDID pass-through
Connectors:
•HDMI OUT: (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible
•DM LITE IN: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to the DM Lite output port of a DM Lite transmitter or DMPS Lite™ switcher
•24V 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included
•AUDIO OUT: (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;\ Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Controls and Indicators:
•LINK: (1) Green LED, indicates that a DM Lite link is established
•PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational
•HDMI OUT: (1) Green LED, indicates that the device is transmitting an HDMI signal
•DM LITE IN: (2) LEDs on RJ 45 connector. Green indicates that a DM Lite link is established, Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video
Humidity: 20% to 90% RH (non-condensing)
Enclosure:
•Chassis: Metal, black finish, vented sides, 2 mounting brackets included
•Mounting: Freestanding, surface mountable, or attachment to a single rack rail

Receiver 2238084 kb - Data Sheet

Project List

Find a Dealer