50W wall mount power supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. The GLA-PWS50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. The GLA-PWS50 mounts conveniently over a 4-inch square or 2-gang electrical box. All connections are made inside the electrical box via flying leads using twist-on wire connectors. A partition is included to isolate high voltage from Class 2 wiring within the box.
50 Watt Cresnet power supply
Powers the IPAC and other Cresnet devices
Provides backup power for Crestron Green Light cabinets
Mounts to a 4-inch square or 2-gang electrical box
Spec Sheet available - Yes
Height:
4.00 in (10.16 cm)
Width:
5.55 in (14.09 cm)
Depth:
2.27 in (5.76 cm) without partition
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
AC Voltage:
240 Volts
Current Draw:
1 Amps
DC Voltage:
24 Volts
Peak Power:
50 Watt
Depth:
57.66 mm
Height:
101.60 mm
Width:
140.97 mm
Product Weight:
0.54 kg
Humidity:
10 to 95 % (RH, non-condensing)
Heat Dissipation:
26 BTU/hr
Fuse:
T3.15AH
Output:
6-inch flying leads, 18 AWG, Cresnet power output
Line Power:
1A at 100 to 240 Vac, 50/60Hz
Output Power:
50 W (2.1 Amps at 24 Volts DC, regulated, limited power source)
Ripple/Noise:
<1 %
CRESNET-HP-NP
- 22AWG Cresnet High-power Control Cable, Non-plenum
CRESNET-NP
- 18/24AWG Cresnet Control Cable, Non-plenum