CLW-LDIMEX is plug in dimmer designed to operate as part of a complete Crestron automation system communicating via the infiNET EX wireless control network. Without the need for additional control wiring, the CLW-LDIMEX easily acts in place of standard in-wall dimmer or light switch for conventional floor and table lamps. Crestron's groundbreaking infiNET EX wireless technology affords reliable 2-way communications throughout a home without the need for physical control wiring. Employing a 2.4GHz mesh network topology and the latest Zigbee pro stack, every infiNET EX device functions as a wireless expander, increasing effective range and reinforcing the complete network by providing multiple redundant signal paths within the mesh network.
Convenient wireless lamp controller
Crestron system integration via infiNET EX wireless network
Connections directly to any standard U-ground outlet
Utilizes latest Zigbee Pro stack
600W incandescent/ tungsten halogen or magnetic low-voltage
Spec Sheet available - Yes
Height:
5.71 in (14.5 cm)
Width:
3.13 in (8.0 cm)
Depth:
1.74 in (4.4 cm)
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
AC Voltage:
120 Volts
Depth:
44.20 mm
Height:
145.03 mm
Width:
79.50 mm
Product Weight:
0.24 kg
Peak Power:
600 Watt
Incandescent/Tungsten Halogen Load Ratings:
600 W
Magnetic Low Voltage Load Ratings:
6000VA/450W
Wireless RF Transceiver:
2-way RF, 2.4GHz ISM Channels 11 to 26 (2400 to 2483.6MHz), IEEE 802.15.4 compliant
Wireless RF Transmitting Power:
>5 mW
Controls Setup:
One recessed push button with red LED, used to link the repeater to a gateway
LED Indicators:
Power green, indicates 12V DC power supplied from external power supply
LED Indicators:
NET yellow, indicates communication with the network
Line Connectors:
One gounded AC plug
Load Connectors:
Ungrounded AC power socket
Power Requirements:
120Vac, 60Hz
Enclosure:
White high-impact injection-molded plastic