The CLCI-DIMUEX-W is a universal dimmer capable of dimming 230VAC lighting loads. Its ultra-slim design allows it to be installed in the ceiling, next to or near the fixture. The CLCI-DIMUEX-W communicates with the Crestron control system using infiNET EX® wireless technology, making it perfect for both new and retrofit applications.
The CLCI-DIMUEX-W installs inline without requiring special wiring and can be controlled via a standard light switch.
Universal Dimming
The CLCI-DIMUEX-W supports dimming incandescent, tungsten-halogen, magnetic low voltage, electronic low voltage and dimmable CFL loads. Load detection circuitry automatically determines forward- or reverse-phase dimming mode. Two sets of screw terminals (internally wired in parallel) enable easy wiring to more than one load of up to 300 W/VA.
Easy Loop-Thru Wiring
The CLCI-DIMUEX-W is powered using a set of high-voltage screw terminals and has a second set of terminals that are wired in parallel to easily daisy-chain additional CLCI-series devices. This provides a fast, clean installation when deploying multiple CLCI- devices and eliminates the need for additional wire connectors or extra gang boxes. In some retrofit applications, this lets you create more zones from what was originally wired.
Out-of-the-box Control via Standard Switch
The CLCI-DIMUEX-W provides built-in support for applications that require basic load control using a cost effective maintained or momentary switch to control the load. Use a maintained or momentary switch to perform basic on and off control. A momentary switch can also be used for basic dimming control by pressing and holding the button.
Complete Crestron Control
A Crestron control system connection allows the CLCI-DIMUEX-W to be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron Fusion® software for a complete solution to effectively manage energy.
Simple Setup
Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.
