Circuitry uses a high stability PLL synthesised UHF transmitter designed for use on licensed free UHF FM 863-865 MHz frequencies
It has 16 programmed preset switchable channels
Antenna is a BNC swivel Helical wound type developing 10mW ERP.
Audio metering is via 5 LEDs mounted on the front panel, audio Inputs 3 Pin XLR - 6.35mm Jack Plug - RCA audio output sockets 1 x 6.35mm and 1 x 3.5mm headphone Jack plug sockets – DC input 3.5mm Jack socket
Power Supply is provided by an external 12V DC 500mA supply
the GT-502T is a rack mountable transmitter and PLL synthesised UHF transmitter designed for use on licensed free UHF FM 863-865 MHz frequencies. It has 16 programmed preset switchable channels. The antenna is a TNC swivel Helical wound type developing 10mW ERP. Audio metering is via 5 LEDs mounted on the front panel, audio Inputs 3 Pin XLR - 6.35mm Jack Plug (balanced input) - RCA audio output sockets 1 x 6.35mm and 1 x 3.5mm headphone Jack plug sockets – DC input 3.5mm Jack socket. Power Supply is provided by an external 12V DC 500mA supply.
Circuitry uses a high stability PLL synthesised UHF transmitter designed for use on licensed free UHF FM 863-865 MHz frequencies
It has 16 programmed preset switchable channels
Antenna is a BNC swivel Helical wound type developing 10mW ERP.
Audio metering is via 5 LEDs mounted on the front panel, audio Inputs 3 Pin XLR - 6.35mm Jack Plug - RCA audio output sockets 1 x 6.35mm and 1 x 3.5mm headphone Jack plug sockets – DC input 3.5mm Jack socket
Power Supply is provided by an external 12V DC 500mA supply
Operating range in free air (open field) 100 Metres
Rotary controls: Aux / mic / headphone volume
AC Adaptor: 12 VDC 500mA
Wireless Receiver Transmission - FM
Wireless Receiver Transmission - UHF
Wireless - Yes
Spec Sheet available - Yes
AC Voltage (Maximum):
230 Volts
AC Voltage (Minimum):
115 Volts
Current Draw:
0.50 Amps
DC Voltage:
12 Volts
Dimensions:
215 x 220 x 44 mm (8.47" x 8.66" x 1.74")