Network Equipment : Gateways : Clear-Com - CG-X1

Single Slot-X1 Gateway chassis with power supply

Model: CG-X1

Radio Bridging
Port-to-port
Port-to-multi-port
Radio-over-IP (RoIP)
Analog-to-digital

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The CG-X1 is a 2-port Clear-Com Gateway device that enables radio bridging, radio interfacing, and IP interfacing in a simple modular design. Using a modular design, the CG-X1 can be configured to be a single 2-port module for 4-wire connecitivity (intercom, radio and audio sources), VoIP connectivity (SIP and RoIP), or digital radio connectivity (Digital Voice Systems' AMBE™ 3003 VoCoder technology).

Radio Bridging
- Port-to-port
- Port-to-multi-port
- Radio-over-IP (RoIP)
- Analog-to-digital
- Digital-to-digital
Radio Interfacing
- Trigger radios with 4-wire port signaling
- DMR and P25 compatibility
IP Interfacing
- Voice-over-IP (VoIP)
- RoIP
- Unicast
- Multicast
- SIP (8 assignable SIP accounts per IP module)

Spec Sheet available - Yes

4-WIRE AUDIO PORTS:
4-Wire:
Input/Output Levels: -16 to 7 dBm @ 600 Ohms, adjustable in 0.1dB steps
Frequency Response: 5 to 3400 Hz; +/-1 dB ref. to 1 KHz
Isolation: >60 dB
Idle Noise: <20 dbrnC0
Input Impedance: 600 Ohms or 100 Ohms, software selectable each port
Output Impedance: 600 Ohms, true differential
Hybrid Return Loss: 25 dB minimum
PORT SIGNALING:
M-Lead Relay:
Optical: Coupled MOS
Maximum Contact Voltage: 60 VDC, 20 VAC
Maximum Current: 50 mA
E-Lead Input:
Active High Input: Open circuit or >+1.8 VDC
Active Low Input: Ground, negative voltage or <+0.32 VDC
Clear-Com Signaling: Eclipse and HelixNet
DTMF Signaling:
E&M Lead (COR & PTT) Signaling:
VOICE-OVER-IP MODULE:
IP ports:
Format: Supports 10Base-T and 100Base-T
Networking Stack: TCP/IPv4
Protocols: SIP, SDP, RTP, IPV67 and STUN (Simple Traversal of UDP
through Network Address Translation):
Codecs: G.711 (fully compatible), G.726 (16/24/33/40 kbps), G.722,
DVI4 (narrow/HD/Ultra HD), Linear PCM:
SIP Accounts: 8 per module
DIGITAL RADIO MODULE:
VoCoder: 3-channel
Digital Voice Systems: AMBE-3003™ Vocoder encode or decode AMBE™
Input/Output: Analog and Serial
Encode/Decode: P25, DMR
INTERFACE AND CONNECTORS:
LAN: RJ45 (port 2)
PC Configuration: USB Port Type B
Power Supply: Switchable plug-in adapter with locking connector and IEC cord
Input Voltage: 85 – 264VAC; 100 – 240VAC; nominal
Output Voltage: 12V; 1.67A
MTBF (min.): 200,000 hours demonstrated
Temperature:
Operating: 32°F - +122°F (0°C - +50°C)
Storage: -40°F - +176°F (-40°C - +80°C)
Humidity: 0 – 95%, non-condensing
Dimensions: 5.4in W x 1.4in H x 6.4in D (137.2mm x 35.6mm x 162.6mm)
Weight: 3.5lbs (1.59kg)
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Product Weight: 1.59 kg

Clear-Com_Gateway_CG-X1_CG-X4_Datasheet.pdf 1209 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

g4518 RF Gateway, Octa DVB-S/S2

by VITEC

g4512 RF Gateway, Dual DVB-S/S2 and dual DVB-CI

by VITEC

KNX Secure IP Gateway, DIN Rail Mount

by Crestron Electronics, Inc.