The GPIO-1 provides 16 general purpose inputs and outputs to control various aspects of a Vocia system. The GPIO-1 is a monitored device and can be used with an LSI-16e in life safety applications where more logic inputs or outputs are required. The GPIO-1 has dual powering from PoE Ethernet ports and alternate powering from dual 24V DC inputs. In the event of power loss, changeover between power sources will provide uninterrupted operation.
16 general purpose logic inputs and outputs
Device monitoring
Able to be used to directly interface with fire
alarm and emergency equipment
PoE capable with alternate powering from
auxiliary 24V DC supply (dual inputs)
Software-configurable
Control over a single Ethernet cable
Dual Ethernet ports for redundancy
Rotary switches for device identification
IP30 Compliant
CE marked, UL listed & RoHS compliant
Covered by Biamp Systems’ five-year warranty
Spec Sheet available - Yes
General Purpose Outputs:
Quantity: 16
Type: FET Switch, open drain (low side driver)
Max Continuous Current: 0.35VA
Current Limit: 0.8A
Maximum External Supply: 30V DC
VMon Input Shutdown 35V DC
General Purpose Inputs:
Quantity 16
High Range Logic Low: 0-8V DC
High Range Logic High: 12-30V DC
TTL Logic Low: 0 – 0.8V
TTL Logic High: 2-5V
Voltage Monitor: 4-30V DC
Input Transient Protection: ± 8kV Peak
Input Isolation: 500V RMS
Network Connection:
Dual RJ45 with shielded Ethernet cable(CAT5, CAT5e, CAT6, or CAT7)
Compliance:
FCC Part 15, Class B
CE Marked
RoHS Directive
UL60065 Listed E215636
C-UL Listed, E215635
C-Tick, N24138 (Australia)
EN54-16 Certified