HDBaseT Receiver is made to work with AVPro Edge HDBaseT Matrix Switchers

Model: AC-EX70-444-RNE-P

HDMI 2.0(a/b)
18Gbps bandwidth support (using ICT)
Ultra Slim (.47 inch/12mm)
Up to 4K60 4:4:4 support
Full HDR support (HDR 10 and 12bit)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This HDBaseT receiver is the perfect companion to AVPro Edge's HDBaseT matrix switchers. It's slim design and rich features make this small unit the perfect solution for HDR Distribution. Using standard category you are able to distribute a 18Gbps signal up to 70 meters. Utilizing ICT (Invisible Compression Technology) we have achieved what was thought to be impossible. We can deliver a virtually lossless high bandwidth 4K HDR signal with support for all signals up to 18Gbps. Deep Color and HDR metadata remain intact making the transmission free of artifacts like banding. Other similar devices will deliver a sub-par image that has very visible banding and color shifting.

HDMI 2.0(a/b)
18Gbps bandwidth support (using ICT)
Ultra Slim (.47 inch/12mm)
Up to 4K60 4:4:4 support
Full HDR support (HDR 10 and 12bit)
HDR, HDR10+ and HLG support
4K --> 1080P down-scaling for mixed systems
EDID management and EDID emulate
4K and HD test patterns built into Tx and Rx for troubleshooting
Ethernet hub capability
L/R Audio Extraction on Tx and Rx
HDCP 2.2 (and all earlier versions supported)
CEC pass through
3D support
100M (330ft) on 1080P (Cat6a)
Up to 70m (230ft) on 4K (up to 4K60 4:4:4, HDR) (Cat6a)
Bi-directional 48v PoH (power over HDBaseT, only one power supply needed)
I-pass feature for control system "pass-through"
3-20v protection circuit built in for safe IR transport
Bi directional RS232 Transport
LED status, link, power indication lights
Use single UTP/STP LAN cable (CAT-5E/6A) with substitute HDMI cable to achieve long distance transmission.
Supports uncompressed PCM 2- Ch., LPCM 5.1 and 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, atmos
ESD protection circuitry (Inputs and Outputs) to 7KV
Can cascade
Includes:
AC-EX70-444-RNE (Receiver)
2 x 3 Pin Terminal blocks for Audio and RS232 Ports
2 x Mounting Brackets
4 x Screws for Mounting Brackets

HDBaseT - Yes
Receiver/Transmitter Cable Type - HDMI
Receiver/Transmitter Format Type - IR
Receiver/Transmitter Format Type - RS-232
Warranty - Yes
Spec Sheet available - Yes

Colour: Black
Video Resolutions: Up to 4K 60Hz 4:4:4
VESA Resolutions: Up to DCI 4K (4096x2160)
HDR formats/Resolutions: 420, 422, 444 (10 and 12 Deep Color) HDR10, HDR10+, HLG
Color Space: YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)
Chroma Subsampeling: 4:4:4, 4:2:2, 4:2:0 Supported
Deep Color: Up to 16 bit (1080), Up to 12 bit (4K)
Audio Formats Supported HDMI: PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTSHD Master Audio, DTS-X, Dolby Atmos
Audio Formats Supported Extracted (2CH Port): PCM 2 CH (No Downmix)
HDBaseT (CAT) Distance (4k): 70m (230ft)
HDBaseT (CAT) Distance (Full HD): 100m (330ft)
HDMI Lead Out (up to 4K60 4:4:4): Up to 50ft (using Bullet Train HDMI)
HDMI Lead Out (w/ AOC Cable) (up to 4K60 4:4:4): Up to 130 Feet (using Bullet Train AOC)
Bandwidth: 18 Gbps (w/ ICT)
HDCP: HDCP 2.2 and earlier
HDMI: Type A
Audio (Extracted Analog): 3 pin terminal block (unbalanced) each
IR Rx: 3.5mm Stereo (3 Conductor) each
RS232: 3 pin terminal block each
Power: 2 pin terminal block each
Storage Temperature: -4 to 140°F (-20 to 60°C)
Humidity Range: 5-90% RH (No Condensation)
Depth: 132 mm
Height: 18 mm
Width: 100 mm
Shipping Weight: 0.45 kg
DC Voltage: 48 Volts
Product Weight: 0.23 kg
Active Power: 9 Watt
Wireless: No
Operating Temperature (Maximum): 51 C
Operating Temperature (Minimum): -5 C
Current Draw: 0.50 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Shipping Width (with packaging): 194 mm
Shipping Height (with packaging): 45 mm
Shipping Depth (with packaging): 137 mm

Receiver 401344 kb - Data Sheet

Project List