Microphones : Headworn Microphones : Audio-Technica - BP893CL4

MicroEarset Omnidirectional Condenser Headworn Microphone with Lemo Connector

Model: BP893CL4

Outstanding clarity and intelligibility
Lightweight and ergonomic design
Extremely unobtrusive, 1-inch flexible boom
Secure over-the-ear placement
Extended frequency response for natural vocal reproduction

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

MicroEarset omnidirectional condenser headworn microphone with 55" cable terminated with Lemo connector for Sennheiser wireless. BP893 omnidirectional condenser headworn microphone, less power module. 1.4m (55") permanently attached miniature cable terminated for Sennheiser wireless systems using Lemo connector. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.

Outstanding clarity and intelligibility
Lightweight and ergonomic design
Extremely unobtrusive, 1-inch flexible boom
Secure over-the-ear placement
Extended frequency response for natural vocal reproduction
Fixed-charge back plate, permanently polarized condenser element
Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak body-pack wireless transmitters
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Headset Mic Type - Condenser
Headset Mic Type - Dynamic
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
Spec Sheet available - Yes

Cable Length: 1.40 m
Cable Length: 140 cm
Maximum Frequency Response (Bandwidth): 20,000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Certifications: FCC
Dynamic Range: 88 dB
Impedance: 245 ohm
Maximum SPL (Sound Pressure Level): 114 dB
Sensitivity: -34 dB
Signal to Noise Ratio: 68 dB
Current Draw: 0 Amps
DC Voltage: 52 Volts
Product Weight: 0 kg
Warranty (Length/Type): 2 Years Limited End-User
Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
Current Consumption: 0.10 mA typical at 5V (wireless only)
Voltage Range: 2.5 to 11 V (wireless only)
Weight:
Dimensions:
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
AUDIO-TECHNICA CASE STYLE: M31

Headworn Microphone 426 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Supercardioid Condenser Headset Microphone

by Electro-Voice

Headworn Condenser Microphone

by Electro-Voice

Low Profile Headset Microphone

by Countryman Associates, Inc.