Cables & Connectors : Audio Cables : ARX Systems - UniMIX

Six Balanced XLR Mic/Line Input Channels with Individual Level Controls

Model: UniMIX

Individual level controls for each input channel - infinity through 0db to +6dB
Individual gain controls for each input channel, 10 to 50 dB
Stereo line in level and trim control
Master output 3 way EQ and level control
System status LEDs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Each mic/line input has infinity to +6dB of level available on the front panel, as well as a 10 to 50dB input gain control. The stereo line input channel has a –10 to +10dB level trim control, to allow accurate matching of any line level signals. On the rear panel, each of the 6 electronically balanced mic inputs can be switched to line via individual switches.

Individual level controls for each input channel - infinity through 0db to +6dB
Individual gain controls for each input channel, 10 to 50 dB
Stereo line in level and trim control
Master output 3 way EQ and level control
System status LEDs
Recording master level control and automatic gain control threshold trim
Auxiliary master output control
Marker panel for labeling input channels
6x Female XLR balanced inputs wired pin 1 audio ground, pin 2 +, pin 3 –
RCA type stereo line inputs
Transformer isolated XLR balanced recording output
Left and right male XLR balanced outputs, wired pin 1 audio ground, pin 2 +, pin 3 –
Transformer isolated auxiliary master XLR output
Global mic input phantom power switch

Input Impedance Mic -balanced: 4 k ohms Line 22 k Ohms -unbalanced
Variable Input Gain Microphone: 10 to 50 dB with rear trim control, Mic/ Line switch -20dB
Output Level (maximum): +21 dB
AGC Threshold: –50 to –20 dB
AGC Output Gain: –20 to +20 dB
Phantom Power: 48 V DC switchable on all Microphone Inputs
Output signal/noise (at unity gain): -90dB A weighted, all inputs at Unity, Master at Unity
Dynamic Range: 115 dB
Master Output EQ: Low 100Hz 15dBCut/Boost, Mid 800HZ 15dB Cut/Boost Bell, Broad Q, High 10KHz 15dBCut/Boost
Master Outputs: Electronically Balanced XLR 300 ohms Line Level Balanced Output Connectors Male XLR: Pin 1 Ground, Pin 2 +, Pin 3 –
Frequency Response: 20 Hz to 20 KHz ± 1dB
Distortion (at unity gain: Below 0.0035 % at 100 Hz to 10 KHz
Input Connector Type: Mic/Line - Amphenol Female XLR, Hi Z Input - Phono (RCA type)
Output Connector Type: Amphenol Male XLR
Recording Output Connector Type: Amphenol Male XLR

UniMIX 90 kb - Brochure

Project List

Find a Dealer

Find a Distributor

Suggested Products

Low-profile Earset Cable

by Countryman Associates, Inc.

25ft (7.6m) High-flex Cable with XLR-3 M/F

by RTS

Crestron® Certified RCA Stereo Audio Interface Cable, 12 ft

by Crestron Electronics, Inc.