Radio Frequency (RF) : RF Amplifiers : Adamson Systems Engineering - fP 6400

Power Amplifier with DC, VHF, Thermal and AC Protection

Series: fP

Model: fP 6400

protection protects against infrasonic signals
VHF protection protects the loudspeakers against strong very high frequency non-musical signals above the audible range
Thermal protection prevents the amplifier from being overheated
The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated
AC protection shuts down the power supply if the line voltage is outside the operating voltage

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The fP Series power amplifier is lightweight, efficient, and powerful. With a regulated switch mode power supply, gain sensitivity selection, and sophisticated protection circuitry, we believe that they are the best choice for use with Adamson Speakers. Our two companies have had a long track record and have partnered to insure continued cross-user compatibility. 2 X 3200W at 2 Ohms.

protection protects against infrasonic signals
VHF protection protects the loudspeakers against strong very high frequency non-musical signals above the audible range
Thermal protection prevents the amplifier from being overheated
The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated
AC protection shuts down the power supply if the line voltage is outside the operating voltage
Clip limiter prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining full peak power

Amplifier Type - Power Amplifier
Spec Sheet available - Yes

Maximum output voltage - 8 ohms load: 62 to 104 Vrms
Maximum output voltage - Peak voltage, no load: 88 to 149 Vrms
Output Impedance: 60 M ohms
Slew Rate: 20 V/uS
Input Gain, selectable: 20, 23, 26, 29, 32, 35, 38, 41 dB
Impedance: 20 k ohms
Common Mode Rejection: 50 dB
Operating Voltage: 130 to 265, 65 to 135 V AC
Minimum start voltage: 175 and 95 V AC
Peak inrush current (Soft start limited): 5 A
Depth: 347.98 mm
Height: 88.90 mm
Width: 482.60 mm
Product Weight: 10 kg
Regulatory Compliance: CE Emission EN 55 103-1, E3 Immunity EN 55 103-2, E3, with S/N below 1% at normal operation level Safety EN 60 065, class I

Power Amplifier 198 kb - Data Sheet

Project List

Find a Dealer

Power Amplifier with DC, VHF, Thermal and AC Protection

Series: fP

Model: fP 6400

Suggested Products